Product Introduction
When legacy drive systems fail or require performance upgrades, the Siemens 6SE7018-0TA61-Z offers a reliable, cost-effective solution. This compact unit from the SIMOVERT MASTERDRIVES MC series is designed as a fully integrated AC/DC drive for three-phase motors. With a compact footprint and robust construction, the Siemens 6SE7018-0TA61-Z replaces older analog drives while delivering modern digital control capabilities. Weighing 9.10 kg and measuring 35.60 x 10.20 x 48.30 cm, this Industrial Automation Module fits easily into existing cabinets and control panels.
Technical Specifications
The Siemens 6SE7018-0TA61-Z is a versatile drive that accepts a wide range of DC input voltages and delivers regulated AC output. Below are the key parameters from the product data:
| Parameter |
Value |
| Input Voltage (DC) |
510-650 V DC |
| Output Voltage (AC) |
0-380/480 V AC |
| Output Frequency |
0-400 Hz |
| Phases |
3-Phase |
| Current Rating |
8 A |
| Weight |
9.10 kg |
| Dimensions (cm) |
35.60 x 10.20 x 48.30 |
| Range |
SIMOVERT |
| Subrange |
MASTERDRIVES |
| Type |
Compact units |
| Z Option |
Specify during order |
Industry Applications
In material handling systems, the Siemens 6SE7018-0TA61-Z drives conveyor belts with precise speed control over the 0-400 Hz range. For pumping and fan applications, the wide output voltage range (0-380/480 V AC) allows direct connection to standard industrial motors. The 8 A continuous current supports medium-power loads in factories and process plants. As a replacement for older drive units, the Siemens 6SE7018-0TA61-Z reduces energy consumption and improves system reliability.
Installation & Setup Guidance
Mount the Siemens 6SE7018-0TA61-Z in a clean, dry cabinet using the provided holes. Ensure proper airflow around the cooling fins given the compact dimensions (35.60 cm height). Connect DC input (510-650 V DC) to the designated terminals per the manual. Route AC output cables (0-380/480 V AC) to the motor with appropriate gauge for 8 A. Set the required output frequency via the onboard DIP switches or remote interface. Always verify the Z option configuration before energizing the drive.
Maintenance & Reliability
Regularly inspect the Siemens 6SE7018-0TA61-Z for dust accumulation on the heatsink and fans. Check DC bus capacitors every 24 months of operation. The rugged enclosure withstands industrial vibration, but tighten all mounting screws annually. Monitoring the drive's temperature prevents thermal overload. By following these steps, the Siemens 6SE7018-0TA61-Z delivers long service life with minimal downtime.
Selection Guide & Purchasing Advice
Before ordering, confirm your system DC supply falls within 510-650 V DC and the motor draws 8 A or less. Specify the required Z option code (e.g., communication interface or braking module). For more details or to place an order, visit ubest101.myshopify.com – your trusted source for genuine Siemens 6SE7018-0TA61-Z Industrial Automation Modules.