Product Overview
When precise motion control is essential for industrial automation, the Schneider TSXCAY41 delivers reliable performance. This motion control module from Schneider Electric is designed for servo motor applications, offering four-axis modularity and efficient power dissipation between 10 and 17 watts. Part of the Modicon Premium Automation platform, the TSXCAY41 integrates multiple voltage inputs, including 24 V auxiliary and servo drive control, plus a 5 V counter input, ensuring compatibility with various encoder types.
Key Technical Specifications
The Schneider TSXCAY41 offers a rich set of parameters for demanding motion tasks. Below are the critical specifications derived directly from the product datasheet.
| Parameter |
Value |
| I/O Modularity |
4 axes |
| Input Voltage |
24 V 8 mA auxiliary, 24 V 8 mA servo drive control, 5 V 18 mA counter |
| Power Dissipation |
10 to 17 W |
| Clock Frequency (SSI) |
200 kHz absolute encoder |
| Incremental Encoder Frequency (x4) |
1000 kHz counting, 250 kHz input |
| Acquisition Speed |
54,000 to 270,000 points/min |
| Acceleration Time |
8 ms to 10 s |
| Resolution |
0.5 to 1000 position units/point |
| Input Impedance |
270 Ω counter, 3000 Ω auxiliary and servo control |
Installation and Setup Guidance
When integrating the Schneider TSXCAY41 into your control system, follow these practical steps:
- Use the HE-10 connectors for servo drive control inputs and auxiliary inputs. The module provides one 20-pin connector for servo drive inputs and three additional 20-pin connectors for auxiliary inputs, reflex outputs, and sensor power.
- For encoder connections, utilize the SUB-D 15 connectors. The TSXCAY41 supports absolute encoders with SSI output (16-25 bits) and incremental encoders (10-30 V totem pole or 5 V DC RS422).
- Ensure the input voltage limits are respected: auxiliary and servo drive control inputs accept 19-30 V, while counter input is ≤5.5 V.
- Mount the double-format module securely in your rack, and verify proper grounding to minimize electrical noise.
Maintenance and Reliability for Long-Term Performance
The Schneider TSXCAY41 is built for industrial environments, operating in temperatures from 0 to 60 °C and humidity up to 95 % without condensation. Its power dissipation of only 10-17 W contributes to lower heat generation, reducing thermal stress on surrounding components. To maintain reliability:
- Periodically check the LED indicators on the front panel: RUN (green), I/O fault (red), ERR (red), and axis diagnostics (green).
- Inspect connectors for corrosion or looseness, especially in harsh conditions.
- Keep the module within its altitude limit of 2000 m to avoid performance degradation.
Efficient energy management directly reduces operational costs over the system's lifespan.
Buying Guide – What to Verify Before Purchasing
Before ordering the Schneider TSXCAY41 for your motion control project, confirm the following:
- Your servo motors and encoders are compatible with the input types listed (SSI absolute, incremental with RS422 or totem pole).
- The power supply provides stable 24 V DC for auxiliary and servo drive inputs and 5 V DC for the counter input.
- Your controller (e.g., Modicon Premium) supports this double-format motion module.
- Check that the required cable connectors (HE-10, SUB-D) are available.
For reliable sourcing, turn to UBEST Automation (ubest101). We stock genuine Schneider TSXCAY41 modules ready for immediate shipment. Contact our team for bulk pricing or technical inquiries.