Product Introduction
The GE IC200MDL241 discrete input module is a key component for the VersaMax I/O and control system. It provides 16 non-isolated inputs arranged in two groups of eight, operating at 240 VAC. This module draws all its power from the backplane, simplifying installation and reducing external wiring. Designed for demanding industrial environments, the IC200MDL241 delivers reliable signal acquisition from pushbuttons, sensors, and switches, converting them into discrete data for the CPU.
Technical Specifications
The table below lists the key parameters of the GE IC200MDL241:
| Parameter |
Value |
| Brand |
GE Fanuc |
| Series |
Versamax |
| Part Number |
IC200MDL241 |
| Description |
Discrete Input Module |
| Application |
VersaMax I/O and Control System |
| Operating Voltage |
240 Volts AC |
| Backplane Current Rating |
110 milliamps |
| Maximum Response Time (On) |
1 Cycle |
| Built-in Power |
Yes |
| Number of Inputs |
16 Discrete Inputs |
| Group Isolation |
Yes |
| Location |
Versamax I/O Carriers |
| LEDs |
16 Individually Numbered LEDs + 1 Backplane LED |
| Approximate Dimensions |
110 x 66.8 x 50.0 Millimeters |
Real-World Applications
The GE IC200MDL241 excels in material handling, packaging, and assembly lines where reliable AC input detection is needed. For example, in a conveyor system, it monitors proximity sensors and limit switches, sending accurate on/off signals to the controller. Its 240 VAC rating makes it ideal for legacy European installations. With two isolated input groups, it can handle different voltage zones safely, reducing the risk of ground loops and improving system integrity.
Installation & Setup Guidance
Mount the IC200MDL241 on a DIN rail using a compatible VersaMax I/O carrier base. Ensure the carrier provides proper backplane connection. The module supports hot swapping, so you can replace it without powering down the entire rack. Use snap-in terminals for field wiring; they simplify connections and reduce installation time. Verify that the input voltage does not exceed 264 VAC (off-state range 0-40 VAC). Each group of eight inputs shares a common terminal; wire inputs accordingly.
Maintenance & Reliability
The GE IC200MDL241 requires minimal maintenance. Periodically inspect the LED indicators: 16 individual LEDs show input status, and one backplane LED confirms module power. Keep the module free of dust and moisture; its compact design (110 x 66.8 x 50 mm) fits tight enclosures. Since it draws power from the backplane, there are no additional power supply costs. The 1500 V isolation between groups enhances reliability in noisy electrical environments.
Selection Guide & Purchasing Advice
Before buying, confirm your system voltage (240 VAC) and input count (16 points). The GE IC200MDL241 is a direct replacement for earlier VersaMax input modules and is fully compatible with GE Fanuc PLCs. For custom requirements, consult the official documentation. UBEST Automation stocks genuine GE parts. For additional assistance, visit the store at ubest101.myshopify.com.