Product Introduction
When your Versamax PLC or I/O station requires additional capacity, the GE IC200ERM002 expansion receiver module provides a reliable upgrade path. Manufactured by GE Intelligent Platforms as part of the Versamax series, this non-isolated expansion receiver module boosts the number of connected modules and extends system functionality. The IC200ERM002 allows you to increase I/O points without replacing existing hardware, making it a cost-effective solution for expanding industrial automation systems.
Technical Specifications
The GE IC200ERM002 offers critical performance parameters that ensure seamless integration:
-
Multi-Rack Cable Length: Up to 50 feet (15 meters) for multi-rack configurations.
-
Single-Ended Cable Length: Up to 3.3 feet (1 meter) for single expansion rack setups.
-
Data Transfer Speed: Selectable between 5 Mbps and 2.765 Mbps depending on implementation.
-
Backplane Voltage: Supports 5 V or 3.3 V backplane.
-
Current Consumption: 70 mA at 5 V, 20 mA at 3.3 V.
-
Maximum Capacity: 7 racks with up to 8 modules per rack.
-
Indicators: 3 onboard LED indicators for operating status.
-
Connectors: Two 26-pin D-shell expansion female ports.
These specifications enable the IC200ERM002 to handle demanding expansion tasks while maintaining reliable communication.
Industry Applications
The GE IC200ERM002 is ideal for upgrading existing Versamax systems in manufacturing, process control, and material handling. For example, consider a factory that needs to monitor additional sensors without replacing the main PLC. By installing the IC200ERM002, engineers can add up to 56 modules (7 racks × 8) to the existing I/O network, drastically increasing system capacity. In a multi-rack configuration, the 50-foot cable length allows remote placement of I/O racks, simplifying wiring in large facilities. This module also supports both single-ended and multi-rack setups, providing flexibility for various expansion needs.
Installation & Setup Guidance
When installing the GE IC200ERM002, ensure a compatible power supply is connected to provide power to all devices. If using an additional power supply or power booster carrier, connect it to the main power source on the IC200ERM002. For multi-rack implementations, keep total cable length within 50 feet; for single-ended setups, limit cable length to 3.3 feet. The two 26-pin D-shell ports allow straightforward connection to expansion cables. After mounting, verify correct LED indicators to confirm status. Always consult the Versamax system manual for detailed wiring and configuration steps.
Selection Guide & Purchasing Advice
Before purchasing the GE IC200ERM002, verify your current Versamax system compatibility and confirm the required expansion type (single-ended or multi-rack). Consider the number of racks and modules needed to match your I/O requirements. The IC200ERM002 is available from UBEST Automation, your reliable source for industrial automation spares. Ensure you have the appropriate power supply and cables rated for the distances specified. For any questions, contact our team at ubest101 for assistance in selecting the right expansion module for your application.