Introduction to the Flexem F5-MD0032N
The Flexem F5-MD0032N Industrial Automation Module delivers dependable discrete output control for demanding automation environments. With 32 output points and a flexible NPN/PNP configuration, this module integrates seamlessly into PLC and DCS systems, providing precise switching for actuators, relays, and indicator lamps.
Key Performance Metrics
Engineered for consistent operation, the F5-MD0032N operates at a rated voltage of 24VDC with a wide voltage range of 19.2 to 28.8VDC. Each output point supports a rated current of 0.5A, and the module provides 0.5A per group. The maximum voltage drop is 1VDC, ensuring efficient power delivery. Leakage current when turned off is less than 5μA, minimizing false signals.
Technical Specifications
| Parameter |
Value |
| Output Characteristics |
32 Points |
| Output Type |
NPN (PNP) |
| Rated Voltage |
24VDC |
| Voltage Range |
19.2–28.8VDC |
| Rated Current |
0.5A |
| Current per Group |
0.5A |
| Voltage Drop |
Maximum 1VDC |
| Leakage Current (Off) |
<5μA |
| Maximum Incandescent Lamp Power |
2.4W |
| Derating |
None |
| Start Time |
Maximum 34μs |
| Turn-off Time |
Maximum 250μs |
| Maximum Output Frequency |
1KHz |
| Short Circuit Protection |
Available |
| Peak Short-circuit Output Current |
1.3A |
| Self-recovery After Fault |
Per 10ms |
| Clamping Voltage |
Maximum 39VDC, ±1V |
| Isolation |
500V AC (output to internal logic) |
| Cable Type |
Unshielded |
| Maximum Cable Length |
50m |
| Wiring Structure |
Removable terminal block |
| Dimension |
Dimension C |
Real-World Applications
The F5-MD0032N excels in packaging machinery, where rapid and reliable output switching controls solenoids and pneumatic valves. Its 34μs start time and 250μs turn-off time enable high-speed operations, reducing cycle times and boosting throughput.
In material handling systems, the module's 32 outputs manage conveyor routing and sorting actuators. The built-in short-circuit protection with self-recovery every 10ms minimizes downtime, ensuring continuous operation even under transient faults.
Installation & Setup Guidance
Mount the F5-MD0032N securely on a DIN rail or panel using the removable terminal block. Connect the 24VDC power supply within the specified range (19.2–28.8VDC). Use unshielded cables up to 50 meters, keeping them away from high-voltage lines to avoid interference. Ensure proper grounding for optimal isolation performance.
Maintenance & Reliability
Routine inspection of terminal connections and cable integrity is recommended every six months. The module's solid-state design eliminates mechanical wear, and the self-recovery feature after short circuits reduces the need for manual resets. This low-maintenance profile contributes to lower total cost of ownership.
Selection Guide & Purchasing Advice
Before ordering, verify your system's output requirements: output type (NPN/PNP), voltage, and current per point. Confirm that the module's 32-point configuration matches your I/O count. For bulk pricing and availability, contact PLC Source PRO, a trusted supplier of industrial automation spares.