Product Overview
Introducing the Bently Nevada 9200-06-05-05-00, a two-wire velocity seismoprobe transducer designed for precise vibration measurement in industrial rotating machinery. This Industrial Automation Module replaces older velocity sensors with enhanced accuracy and environmental durability.
Technical Specifications
Key parameters of the 9200-06-05-05-00 include:
- Sensitivity: 20 mV/mm/s (500 mV/in/s) ±5% when properly terminated and oriented at calibration angle.
- Calibration Load: 10 kΩ across terminals A and B.
- Sensitivity Temperature Coefficient: 0.2%/°C.
- Dynamic Operating Range: 2.54 mm (0.100 in) peak-to-peak maximum displacement.
- Velocity Range: 25 mm/s (1 in/s) at +22 °C casing vibration at 100 Hz with 10 kΩ load.
- Coil Resistance: 1.25 kΩ ±5%.
- Locked Coil Inductance: 125 mH typical.
- Operating Temperature: -29 °C to +121 °C (-20 °F to +250 °F).
- Relative Humidity: To 95% noncondensing.
- Case Material: Anodized aluminum A204.
- Gasket Material: Neoprene.
- Height: 102 mm (4 in) typical.
- Diameter: 41 mm (1.6 in) typical.
- Weight: 300 grams (10.5 ounces) typical.
Industry Applications
The Bently Nevada 9200-06-05-05-00 is ideal for vibration monitoring in turbines, compressors, pumps, and motors. Its two-wire configuration simplifies wiring and reduces costs in new installations or retrofits. Typical applications include bearing housing vibration measurement and shaft vibration monitoring in oil & gas, power generation, and petrochemical industries.
Installation & Setup Guidance
Mount the Bently Nevada 9200-06-05-05-00 using the 1/2-20 UNF-3A stud on the mounting base. Ensure the transducer is oriented at the angle of calibration (±0° as per option 06) for accurate sensitivity. Connect to the terminal block (option 05) using a 10 kΩ load resistor across terminals A and B. For best results, secure the cable to avoid strain and maintain moisture resistance.
Selection Guide & Purchasing Advice
When ordering the 9200-06-05-05-00, verify that the mounting angle (option 06 - 0° ±100), connector (terminal block top mount), and mounting base (no base with stud) meet your application requirements. This unit comes with a 12-month factory warranty and is supplied new in factory packing. For bulk inquiries or expedited shipping, contact PLC Source PRO (formerly ubest101) for competitive pricing.