Product Overview
When unplanned downtime threatens production, the Bently Nevada 9200-06-05-01-00 Two-Wire Velocity Seismoprobe Transducer delivers precise vibration data to detect early signs of bearing wear, imbalance, or misalignment. This industrial automation module is designed for continuous monitoring of rotating machinery in harsh environments. As a key component of any predictive maintenance strategy, the 9200-06-05-01-00 helps prevent catastrophic failures and reduces maintenance costs.
Technical Specifications Breakdown
The Bently Nevada 9200-06-05-01-00 offers a sensitivity of 20 mV/mm/s (500 mV/in/s) with ±5% accuracy when properly terminated. It handles a dynamic operating range of 2.54 mm (0.100 in) peak-to-peak maximum displacement and a velocity range of 25 mm/s (1 in/s) at +22°C with a 10 kΩ load. Key parameters include:
| Parameter |
Value |
| Sensitivity |
20 mV/mm/s (500 mV/in/s) ±5% |
| Dynamic Range |
2.54 mm (0.100 in) peak-to-peak |
| Velocity Range |
25 mm/s (1 in/s) at 22°C, 10 kΩ load |
| Coil Resistance |
1.25 kΩ ±5% |
| Locked Coil Inductance |
125 mH typical |
| Temperature Range |
-29°C to +121°C (-20°F to +250°F) |
| Humidity |
Up to 95% noncondensing; 100% if integral cable |
| Case Material |
Anodized aluminum A204 |
| Weight |
300 g (10.5 oz) typical |
Industry Applications
The 9200-06-05-01-00 is ideal for monitoring vibration in critical rotating assets such as steam turbines, centrifugal compressors, and large pumps. In a typical failure scenario, bearing wear generates increasing vibration amplitudes. With its high sensitivity and wide dynamic range, this transducer catches these changes early, allowing maintenance teams to plan interventions before failure occurs. For example, in a refinery, installing the Bently Nevada 9200-06-05-01-00 on feed pumps has reduced unplanned outages by 30%.
Installation & Setup Guidance
Mount the Bently Nevada 9200-06-05-01-00 using the circular 1/4-20 UNC stud base (Option 01). The transducer supports mounting angles of 0°±100°, with minimum operating frequency of 10 Hz (600 cpm). Use the terminal block top mount connector (Option 05) for secure wiring. Ensure the calibration load is 10 kΩ between terminals A and B, and orient the transducer at the calibration angle for optimal accuracy. Dust and moisture resistant construction allows installation in demanding environments.
Selection Guide & Purchasing Advice
When selecting the Bently Nevada 9200-06-05-01-00, verify compatibility with your existing monitoring system. This transducer requires a 10 kΩ termination load and outputs velocity signals proportional to vibration. For ordering, specify the exact model: 9200-06-05-01-00. As a trusted supplier, ubest101 (PLC Source PRO) offers new and original factory-packed units with a 12-month warranty. Contact us for assistance with configuration and integration into your Bently Nevada system.