Product Introduction
In critical rotating machinery, undetected vibration leads to catastrophic failure. The Bently Nevada 9200-06-01-10-00 Two-Wire Velocity Seismoprobe Transducer provides precise vibration measurement to prevent downtime. This industrial automation module is designed for continuous monitoring of machinery health, delivering reliable data for predictive maintenance strategies.
Technical Specifications
The Bently Nevada 9200-06-01-10-00 offers the following key performance parameters:
| Parameter |
Value |
| Sensitivity |
20 mV/mm/s (500 mV/in/s), ±5% at calibration angle |
| Dynamic Operating Range |
2.54 mm (0.100 in) peak-to-peak maximum displacement |
| Velocity Range |
25 mm/s (1 in/s) at +22°C, 100 Hz, 10 kΩ load |
| Coil Resistance |
1.25 kΩ ±5% |
| Locked Coil Inductance |
125 mH typical |
| Operating Temperature |
-29°C to +121°C (-20°F to +250°F) |
| Relative Humidity |
Up to 95% noncondensing |
| Case Material |
Anodized aluminum A204 |
| Gasket Material |
Neoprene |
| Weight |
300 grams (10.5 ounces) typical |
Industry Applications
The Bently Nevada 9200-06-01-10-00 excels in monitoring rotating equipment such as turbines, compressors, pumps, and fans. Its 20 mV/mm/s sensitivity ensures accurate detection of low-level vibrations, while the wide -29°C to +121°C temperature range suits harsh industrial environments. By providing early warning of bearing wear or imbalance, this transducer helps avoid unplanned downtime and costly repairs.
Installation & Setup Guidance
Proper mounting is critical for accurate readings. The 9200-06-01-10-00 offers mounting angle option 0° ±100° with minimum operating frequency 10 Hz (600 cpm). Use the top-mount connector (option 01) without cable for fixed installations. The mounting base features a circular M10x1 stud (option 10). Calibration requires a 10 kΩ load across terminals A and B. Ensure the transducer is oriented at its calibration angle for ±5% sensitivity accuracy.
Maintenance & Reliability
The Bently Nevada 9200-06-01-10-00 is built for longevity with a dust- and moisture-resistant aluminum housing and neoprene gasket. No routine recalibration is needed if the unit remains within its -29°C to +121°C operating range. Periodically inspect the connector and mounting base for corrosion or loosening. The robust design minimizes drift, ensuring consistent measurement over years of service.
Selection Guide & Purchasing Advice
When ordering the Bently Nevada 9200-06-01-10-00, verify the transducer mounting angle, connector type, and mounting base options match your application. This unit comes with agency approval option 00 (no approvals) and is supplied new in factory packing with a 12-month warranty. For genuine Bently Nevada 9200-06-01-10-00 parts, contact ubest101 for competitive pricing and fast delivery.