Product Overview
The Bently Nevada 9200-03-05-10-00 Two-Wire Velocity Seismoprobe Transducer provides reliable vibration measurement for critical rotating equipment. This industrial automation module converts mechanical velocity into a proportional electrical signal, enabling proactive machine health monitoring. Designed for harsh environments, the Bently Nevada 9200-03-05-10-00 offers robust performance with a sensitivity of 20 mV/mm/s (500 mV/in/s) and a minimum operating frequency of 4.5 Hz (270 cpm).
Industry Applications
Replace aging transducers or upgrade existing monitoring systems with the Bently Nevada 9200-03-05-10-00. Common applications include:
-
Turbine Vibration Monitoring – Accurate measurement at 90° mounting angle ensures reliable data for steam and gas turbines.
-
Compressor Protection – The 25 mm/s velocity range (1 in/s at 100 Hz with 10 kΩ load) detects early bearing faults.
-
Fan and Blower Condition Monitoring – Dust and moisture resistant construction (to 95% RH, noncondensing) suits difficult environments.
Installation & Setup Guidance
Mount the Bently Nevada 9200-03-05-10-00 using the circular M10X1 stud base (option 10) at a 90° angle (±2.5°). Connect via the terminal block top mount (option 05). Calibrate with a 10 kΩ load across terminals A and B. Ensure proper orientation at the calibration angle for ±5% sensitivity accuracy. Operate within -29°C to +121°C (-20°F to +250°F) for the 9200 model.
Maintenance & Reliability
The 9200-03-05-10-00 features an anodized aluminum A204 case and neoprene gasket for long service life. Inspect connections annually and verify coil resistance remains at 1.25 kΩ ±5%. The locked coil inductance of 125 mH (typical) should remain stable. Store in dry conditions; the unit is dust and moisture resistant but avoid submersion unless ordered with integral cable.
Selection Guide & Purchasing Advice
Before ordering, confirm your required mounting angle (90° ±2.5° for this configuration), connector type (terminal block top mount), and agency approval needs (none for option 00). For technical support or replacement guidance, contact ubest101 – a trusted source for genuine Bently Nevada parts. Ensure compatibility with your existing monitoring system’s input impedance (10 kΩ recommended).
Frequently Asked Questions
What is the sensitivity tolerance of the 9200-03-05-10-00?
Sensitivity is 20 mV/mm/s (500 mV/in/s) with ±5% accuracy when properly terminated and oriented at the calibration angle.
What is the maximum displacement this transducer can measure?
Dynamic operating range is 2.54 mm (0.100 in) peak-to-peak maximum displacement.
Can this transducer be used in high humidity environments?
Yes, it operates up to 95% RH noncondensing, and up to 100% non-submerged when ordered with integral cable.
What is the weight of the 9200-03-05-10-00?
Weight is approximately 300 grams (10.5 ounces) typical.
What temperature range does this module support?
Operating and storage temperature for the 9200 model is -29°C to +121°C (-20°F to +250°F).