Product Overview
The Bently Nevada 9200-03-05-01-00 is a Two-Wire Velocity Seismoprobe Transducer designed for continuous vibration monitoring in industrial machinery. Part of the trusted Model 9200 series, this transducer provides accurate velocity measurements to protect critical rotating equipment. Its robust construction and dust/moisture-resistant design ensure long-term reliability in harsh environments.
With a sensitivity of 20 mV/mm/s (500 mV/in/s) and an operating temperature range of -29°C to +121°C, the 9200-03-05-01-00 is ideal for applications where early fault detection minimizes downtime and repair costs. The factory warranty of 12 months underscores its quality and durability.
Technical Specifications
Below are the key technical parameters for the Bently Nevada 9200-03-05-01-00. All values are taken directly from the product datasheet.
| Parameter |
Value |
| Sensitivity |
20 mV/mm/s (500 mV/in/s), ±5% at calibration angle |
| Calibration Load |
10 kΩ (Terminal A to B) |
| Sensitivity Temperature Coefficient |
0.2%/°C |
| Dynamic Operating Range |
2.54 mm (0.100 in) peak-to-peak max displacement |
| Velocity Range |
25 mm/s (1 in/s) at +22°C, 100 Hz, 10 kΩ load |
| Coil Resistance |
1.25 kΩ ±5% |
| Locked Coil Inductance |
125 mH typical |
| Operating Temperature |
-29°C to +121°C (-20°F to +250°F) |
| Relative Humidity |
Up to 95% noncondensing (100% non-submerged with integral cable) |
| Case Material |
Anodized aluminum A204 |
| Gasket Material |
Neoprene |
| Height |
102 mm (4 in) typical (depends on connector) |
| Diameter |
41 mm (1.6 in) typical |
| Weight |
300 g (10.5 oz) typical |
Industry Applications
The Bently Nevada 9200-03-05-01-00 excels in predictive maintenance for motors, pumps, fans, and compressors. In a typical ROI scenario, detecting bearing faults early with this transducer can reduce unplanned downtime by up to 30% and extend equipment life. Use it in power generation, oil & gas, and manufacturing plants where continuous operation is essential.
Configurable with a 90° mounting angle (Option 03) and terminal block top connector (Option 05), it integrates easily into existing monitoring systems. The circular base (1/4-20 UNC stud) simplifies installation on machinery surfaces.
Installation & Setup Guidance
Mount the Bently Nevada 9200-03-05-01-00 transducer securely on a flat, clean surface using the provided stud. Ensure the orientation matches the calibration angle (90° ±2.5°) for accurate sensitivity. Connect the two wires to terminals A and B with a 10 kΩ load across the output. Avoid bending the cable sharply to prevent damage. For integral cable versions, ensure the connector is sealed against moisture. Test the output using a multimeter before commissioning.
Selection Guide & Purchasing Advice
Before purchasing, verify that the Bently Nevada 9200-03-05-01-00 matches your system requirements: confirm the mounting base (Option 01: 1/4-20 UNC stud) and connector (Option 05: terminal block). If your application requires higher temperature tolerance up to +204°C, consider the Model 74712 variant. For detailed specifications, contact PLC Source PRO (ubest101) for expert assistance. All units are new, original, and packed in factory sealing with a 12-month warranty.