Product Introduction
When machinery vibrations exceed safe limits, early detection is critical. The Bently Nevada 9200-03-01-10-00 Two-Wire Velocity Seismoprobe Transducer provides precise vibration data to prevent catastrophic failures. This industrial automation module is designed for continuous monitoring in harsh environments, delivering reliable performance with a sensitivity of 20 mV/mm/s (±5% when properly terminated).
Technical Specifications Breakdown
The Bently Nevada 9200-03-01-10-00 offers key parameters that ensure accurate vibration measurement:
-
Sensitivity: 20 mV/mm/s (500 mV/in/s) at calibration load of 10 kΩ.
-
Dynamic operating range: 2.54 mm (0.100 in) peak-to-peak maximum displacement.
-
Velocity range: 25 mm/s (1 in/s) at 100 Hz with 10 kΩ load.
-
Coil resistance: 1.25 kΩ ±5%; locked coil inductance: 125 mH typical.
-
Operating temperature: -29°C to +121°C (-20°F to +250°F).
-
Weight: 300 grams (10.5 ounces) typical.
These specifications make the Bently Nevada 9200-03-01-10-00 ideal for vibration monitoring in rotating machinery.
Industry Applications
The Bently Nevada 9200-03-01-10-00 transducer excels in predictive maintenance programs for pumps, motors, compressors, and turbines. Mounting options include a circular M10X1 stud base (Option 10) and a top-mount connector (Option 01). Its dust and moisture-resistant design supports relative humidity up to 95% noncondensing, and 100% non-submerged when ordered with an integral cable. Use this device to detect bearing wear, imbalance, and misalignment before they cause downtime.
Installation & Setup Guidance
Mount the Bently Nevada 9200-03-01-10-00 at a 90° angle (±2.5°) to the measurement surface, as specified by Option 03. Ensure proper termination at 10 kΩ across terminals A and B for accurate sensitivity. The neoprene gasket provides environmental sealing. For best results, calibrate the transducer at the intended mounting angle to achieve the ±5% sensitivity tolerance.
Maintenance & Reliability
With a sensitivity temperature coefficient of 0.2%/°C, the Bently Nevada 9200-03-01-10-00 maintains accuracy across wide temperature swings. Its anodized aluminum A204 case resists corrosion. Inspect annually for cable integrity and mounting tightness. The new condition, original factory packing, and 12-month warranty ensure long-term reliability.
Selection Guide & Purchasing Advice
Before purchasing the Bently Nevada 9200-03-01-10-00, verify your mounting angle and connector preferences. This model includes Option 03 (90° mounting, 4.5 Hz minimum frequency), Option 01 (top mount, no cable), and Option 10 (circular M10X1 stud base). As a reliable supplier, PLC Source PRO (ubest101) offers this transducer with factory warranty and fast shipping. Ensure your system has a 10 kΩ input resistance for proper calibration.