Introduction
When machinery vibration goes undetected, unplanned downtime and costly repairs can result. The Bently Nevada 9200-02-05-05-00 Two-Wire Velocity Seismoprobe Transducer provides precise, reliable vibration measurements to protect your critical rotating equipment. As part of the trusted 9200 series, this transducer is designed for continuous monitoring in harsh industrial environments. With a sensitivity of 20 mV/mm/s and a dynamic operating range of 2.54 mm, it delivers accurate data for condition-based maintenance, reducing overall operational costs.
Technical Specifications
| Parameter |
Value |
| Sensitivity |
20 mV/mm/s (±5%) |
| Calibration Load |
10 kΩ (Terminal A to B) |
| Dynamic Operating Range |
2.54 mm peak to peak max displacement |
| Velocity Range |
25 mm/s at 100 Hz with 10 kΩ load |
| Coil Resistance |
1.25 kΩ ±5% |
| Locked Coil Inductance |
125 mH typical |
| Operating Temperature |
-29°C to +121°C |
| Relative Humidity |
To 95%, noncondensing |
| Case Material |
Anodized aluminum A204 |
| Gasket Material |
Neoprene |
| Height |
102 mm (4 in) typical |
| Diameter |
41 mm (1.6 in) typical |
| Weight |
300 g (10.5 oz) typical |
The 9200-02-05-05-00 meets these precise specifications for robust vibration sensing.
Industry Applications
The Bently Nevada 9200-02-05-05-00 excels in monitoring steam turbines, centrifugal pumps, compressors, and fans. Its robust design and wide temperature range (-29°C to +121°C) make it suitable for applications where reliable vibration data is critical for early fault detection. By integrating this transducer into your predictive maintenance program, you can achieve significant cost savings through reduced downtime and extended equipment life.
Installation & Setup Guidance
When installing the 9200-02-05-05-00, ensure the transducer is mounted at the specified angle of 45° ±2.5° to achieve the minimum operating frequency of 4.5 Hz. The connector option 05 uses a terminal block top mount for easy wiring. Use a 1/2-20 UNF-3A stud mounting base (option 05). Calibrate with a 10 kΩ load between terminals A and B for accurate sensitivity. Proper termination and orientation are essential to achieve the ±5% sensitivity tolerance.
Maintenance & Reliability
The 9200-02-05-05-00 is designed for long-term reliability in dusty and moist environments. Its anodized aluminum case and neoprene gasket provide excellent protection. The transducer requires minimal maintenance; periodic inspection of the mounting integrity and cable connections is recommended. The wide operating temperature range ensures stable performance even in extreme conditions, contributing to a low total cost of ownership.
Selection Guide & Purchasing Advice
Before purchasing the Bently Nevada 9200-02-05-05-00, verify the transducer mounting angle, connector type, and mounting base options to match your application. This model comes with no agency approvals required (option 00). For reliable sourcing and fast delivery, choose a trusted supplier like ubest101, which offers new and original factory-packed units with a 12-month warranty. Ensure your system's calibration load matches the 10 kΩ requirement for optimal performance.