Product Introduction
The Bently Nevada 9200-02-01-10-00 is a Two-Wire Velocity Seismoprobe Transducer designed for industrial machinery protection and vibration monitoring. This Industrial Automation Module provides critical data to prevent catastrophic failures by detecting early signs of bearing wear, misalignment, and imbalance. With its robust construction and precise sensitivity, the 9200-02-01-10-00 ensures reliable performance in harsh environments.
Technical Specifications Breakdown
Key parameters of the Bently Nevada 9200-02-01-10-00 include:
-
Sensitivity: 20 mV/mm/s (500 mV/in/s) ±5% when properly terminated and oriented at calibration angle.
-
Dynamic Operating Range: 2.54 mm (0.100 in) peak-to-peak maximum displacement.
-
Velocity Range: 25 mm/s (1 in/s) at +22 °C with 10 kΩ load.
-
Coil Resistance: 1.25 kΩ ±5%.
-
Operating Temperature: -29°C to +121°C (-20°F to +250°F) for the 9200 model.
-
Environmental Protection: Dust and moisture resistant; 95% noncondensing humidity.
These specifications allow the 9200-02-01-10-00 to accurately measure vibration in rotating equipment, enabling early fault detection and reducing downtime.
Industry Applications
The Bently Nevada 9200-02-01-10-00 is ideal for monitoring critical machinery such as turbines, pumps, compressors, and generators. In a typical failure mode scenario, bearing defects cause increased vibration amplitude. The transducer's 2.54 mm displacement range and 25 mm/s velocity range capture these changes, triggering alarms before failure occurs. For example, in a petrochemical plant, installing the 9200-02-01-10-00 on main compressors helps avoid unplanned outages and costly repairs.
Installation & Setup Guidance
Mount the Bently Nevada 9200-02-01-10-00 9200-02-01-10-00 using the circular M10X1 stud base (option 10). The transducer mounting angle must be 45° ±2.5° with a minimum operating frequency of 4.5 Hz (270 cpm). The top-mount connector option (01) has no cable; ensure proper termination with a 10 kΩ load across terminals A and B. Calibrate the sensor at the intended mounting angle for accurate sensitivity. For best results, avoid excessive cable strain and secure the transducer firmly to the machine case.
Maintenance & Reliability
Routine inspection of the Bently Nevada 9200-02-01-10-00 includes checking cable integrity and verifying output calibration. The neoprene gasket provides dust and moisture resistance, but in environments with high humidity (up to 95% noncondensing), ensure seals remain intact. The anodized aluminum case withstands corrosion. To maximize service life, avoid exceeding the operating temperature range of -29°C to +121°C. Regular comparison of transducer readings with known baseline values helps detect drift or damage early, aligning with a proactive maintenance strategy that reduces overall lifecycle costs.
Selection Guide & Purchasing Advice
Before purchasing the Bently Nevada 9200-02-01-10-00, confirm the ordering options: mounting angle 02, connector option 01, mounting base 10, and agency approval 00. No additional approvals are required. Ensure compatibility with your monitoring system's input requirements (10 kΩ load). For genuine, factory-new units with 12-month warranty, source from trusted suppliers. PLC Source PRO (ubest101.myshopify.com) offers this transducer new in original packing, with fast shipping and technical support.