Product Introduction
When critical machinery vibration goes undetected, the Bently Nevada 9200-01-01-10-00 provides precise velocity measurements for predictive maintenance. This two-wire velocity seismoprobe transducer is designed for industrial automation applications where reliable vibration monitoring is essential. As part of the Bently Nevada 9200 series, the Bently Nevada 9200-01-01-10-00 offers a compact, robust solution for detecting displacement and velocity in rotating equipment.
Technical Specifications Breakdown
| Parameter |
Value |
| Sensitivity |
20 mV/mm/s (500 mV/in/s), ±5% when properly terminated and oriented at calibration angle |
| Calibration Load |
10 kΩ Terminal "A" to "B" Output across pins "A" and "B" |
| Sensitivity Temperature Coefficient |
0.2%/°C |
| Dynamic Operating Range |
2.54 mm (0.100 in) peak-to-peak maximum displacement |
| Velocity Range |
25 mm/s (1 in/s) at +22°C casing vibration, 100 Hz, 10 kΩ load |
| Coil Resistance |
1.25 kΩ ±5% |
| Locked Coil Inductance |
125 mH, typical |
| Operating & Storage Temperature (9200) |
-29°C to +121°C (-20°F to +250°F) |
| Environment |
Dust and moisture resistant |
| Relative Humidity |
Up to 95% noncondensing; 100% non-submerged with integral cable |
| Case & Adapter Material |
Anodized aluminum A204 |
| Gasket Material (9200) |
Neoprene |
| Height |
102 mm (4 in) typical (depends on connector option) |
| Diameter |
41 mm (1.6 in) typical |
| Weight (9200) |
300 grams (10.5 ounces) typical |
Industry Applications
The Bently Nevada 9200-01-01-10-00 excels in turbine monitoring, compressor vibration analysis, and pump condition monitoring. When upgrading older vibration sensors, this transducer provides higher accuracy with its 20 mV/mm/s sensitivity and wide dynamic range. Its rugged anodized aluminum housing withstands harsh industrial environments, making it ideal for continuous duty in power generation, oil and gas, and manufacturing plants.
Installation & Setup Guidance
Mount the transducer at an angle of 0±2.5° with a minimum operating frequency of 4.5 Hz (270 cpm). Use the top mount connector option with M10X1 stud base. For accurate calibration, terminate the output with a 10 kΩ load across pins A and B. Orient the transducer at the calibration angle to achieve the specified sensitivity of 20 mV/mm/s. The unit is dust and moisture resistant; for submerged applications, order with integral cable.
Maintenance & Reliability
This Bently Nevada 9200-01-01-10-00 operates reliably from -29°C to +121°C. The neoprene gasket and sealed construction protect against humidity up to 95% noncondensing. Inspect the connector and cable periodically for wear. The 12-month factory warranty ensures peace of mind. Routine calibration verification every 12 months maintains measurement integrity.
Selection Guide & Purchasing Advice
Before purchasing, verify the transducer mounting angle, connector type, and mounting base option match your application. The 9200-01-01-10-00 includes the specified options: angle 0±2.5°, top mount connector, circular M10X1 stud base, and no agency approvals. For further assistance, contact ubest101 to confirm compatibility and availability. Choose this transducer as a reliable upgrade for your vibration monitoring system.