Product Introduction
The Bently Nevada 330709-000-230-10-01-00 is a 3300 XL 11 mm Proximity Probe engineered for precise, non-contact vibration and position measurement in rotating machinery. Designed to deliver long-term reliability, this probe reduces unplanned downtime and extends equipment life, offering a strong return on investment for industrial operations.
Technical Specifications
Below are the key parameters for the Bently Nevada 330709-000-230-10-01-00 3300 XL 11 mm Proximity Probe. Please contact UBEST Automation for a complete datasheet if additional details are required.
| Parameter |
Specification |
| Probe Tip Material |
Polyphenylene sulfide (PPS) |
| Probe Case Material |
AISI 304 stainless steel |
| Probe Cable |
75 Ω triaxial, FEP insulated |
| Thread Size |
M16 x 1.5 |
| Unthreaded Length |
0 mm |
| Overall Case Length |
230 mm |
| Total Length |
1.0 m (3.3 ft) |
| Connector Type |
Miniature coaxial ClickLoc with connector protector |
| Probe Resistance (1.0 m) |
5.9 Ω ± 0.5 Ω |
| Operating Temperature |
-52°C to +177°C |
Industry Applications
The Bently Nevada 330709-000-230-10-01-00 excels in harsh environments where accurate vibration data is critical. Common applications include:
- Steam and gas turbines in power generation
- Centrifugal compressors in oil and gas
- Large motors and pumps in manufacturing
By deploying this 3300 XL probe, facilities achieve higher machine availability and lower maintenance costs, directly improving operational ROI.
Installation & Setup Guidance
For optimal performance, install the Bently Nevada 330709-000-230-10-01-00 following these guidelines:
- Use the recommended probe case torque: finger-tight for connector-to-connector; maximum 0.565 N·m (5 in·lb). For the probe case itself, do not exceed the rated torque.
- Ensure the minimum bend radius of 25.4 mm (1.0 in) for the cable to avoid damage.
- Keep the target surface flat and clean; minimum target diameter is 30.5 mm.
- Thread engagement maximum is 24 mm; do not over-thread.
Proper installation maximizes measurement accuracy and probe lifespan.
Maintenance & Reliability
The Bently Nevada 330709-000-230-10-01-00 requires minimal routine maintenance. Its stainless steel case and PPS tip resist corrosion and wear. Inspect cable connectors periodically for tightness and signs of damage. Avoid temperatures below -34°C for extended periods to preserve the pressure seal. Regular calibration checks ensure continued accuracy, reducing the total cost of ownership.
Selection Guide & Purchasing Advice
When selecting the Bently Nevada 330709-000-230-10-01-00, verify that your system requires a 1.0 m probe with M16 x 1.5 thread and miniature ClickLoc connector. UBEST Automation stocks this exact configuration and offers competitive pricing for volume orders. Contact our team to confirm compatibility with your existing Bently Nevada monitor.