Product Overview
In demanding industrial environments where vibration monitoring is critical, the Bently Nevada 200350-09-00-01 provides reliable, high-accuracy acceleration measurement. Part of the 200350 series, this accelerometer delivers a sensitivity of 100 mV/g ±20% and a wide frequency range of 30 to 600,000 cpm (0.5 to 10,000 Hz). Designed for harsh conditions, it features a stainless steel housing, welded hermetic sealing, and an IP68 enclosure rating.
Technical Specifications
| Parameter |
Value |
| Sensitivity |
100 mV/g ±20% (10.2 mV/m/s² ±20%) |
| Frequency Range |
30-600,000 cpm (0.5-10,000 Hz) |
| Measurement Range |
±50g |
| Transverse Sensitivity |
≤7% |
| Amplitude Linearity |
±1% |
| Mounted Resonant Frequency |
1500 kcpm (25 kHz) |
| Broadband Electrical Noise (1-10 kHz) |
350 μg (3,434 μm/s²) |
| Output Bias Voltage |
8 to 12 VDC |
| Excitation Voltage |
18 to 28 VDC |
| Constant Current Excitation |
2 to 20 mA |
| Settling Time (within 1% of bias) |
2.0 sec |
| Output Impedance |
<150 ohms |
| Discharge Time Constant |
≥0.3 sec |
| Electrical Isolation (Case) |
>108 ohms |
| Operating Temperature Range |
-65°F to +250°F (-54°C to +121°C) |
| Shock Survivability |
5,000 g pk |
| Relative Humidity |
100% relative, condensing, non-submerged |
| Enclosure Rating |
IP68 |
| Mounting Thread |
1/4-28 Female |
| Mounting Torque (Maximum) |
2 to 5 ft-lb (2.7 to 6.8 N-m) |
| Sensing Element |
Ceramic |
| Sensing Geometry |
Shear |
| Housing Material |
Stainless Steel |
| Sealing |
Welded Hermetic |
| Electrical Connector |
2-Pin Mil-C-5015 |
| Electrical Connection Position |
Top |
| Hex Size |
11/16" (1.8 cm) |
| Height |
1.65" (4.24 cm) |
| Weight |
0.051 Kg |
Industry Applications
The Bently Nevada 200350-09-00-01 is ideal for vibration monitoring in rotating machinery such as pumps, fans, compressors, and turbines. Its IP68 rating makes it suitable for washdown environments and outdoor installations where moisture and condensation are present. The wide frequency response ensures accurate detection of both low-speed and high-speed faults.
Installation Guide
Mount the Bently Nevada 200350-09-00-01 using the 1/4-28 female thread with a torque of 2 to 5 ft-lb (2.7 to 6.8 N-m). Ensure the mounting surface is clean and flat for optimal coupling. The unit has no mounting stud (option 09) so direct mounting to the machine surface is required. Use the 2-pin Mil-C-5015 connector for electrical connection at the top of the sensor.
Maintenance and Reliability
With a welded hermetic seal and stainless steel construction, the 200350-09-00-01 requires minimal maintenance. Periodic inspection of the cable and connector for damage is recommended. The ceramic shear sensing element provides long-term stability and resistance to thermal drift. The IP68 enclosure protects against dust and prolonged immersion, ensuring reliable operation in harsh conditions.
Selection Guide and Purchasing Advice
Before purchasing the Bently Nevada 200350-09-00-01, verify that your system requires a 100 mV/g sensitivity accelerometer with CSA, ATEX, and IECEx approvals. The model includes no mounting stud, so ensure your mounting hardware is compatible. For additional information or to place an order, contact ubest101, your trusted supplier of industrial automation spares.