Product Overview
The Bently Nevada 200152-04-CN is an accelerometer interface standard cable designed for reliable vibration monitoring in industrial automation systems. With a 4.0-meter length and connector on the accelerometer end only, this cable provides a secure, sealed connection between accelerometers and monitoring hardware. Engineered to meet the rigorous demands of rotating machinery protection, the 200152-04-CN ensures signal integrity and environmental resistance in harsh plant conditions.
Technical Specifications
| Parameter |
Value |
| Model |
200152-04-CN (based on 200151 series) |
| Cable Length |
4.0 meters |
| Coupling Nut |
Country Specific (-CN) |
| Minimum Bend Radius |
73.7 mm (2.9 in) |
| Operating Temperature Range |
-20 ºC to +100 ºC (-4 ºF to +212 ºF) |
| Construction |
4-conductor, 22 AWG with braided shield and drain wire (85% coverage, minimum), PVC outer jacket, nickel-plated coupling nuts |
| Seal |
IP67 seal to transducers and mating hardware; connectors molded to cable; DC4 insulating compound added for moisture protection |
Note: These cables may be used at lower temperatures if the installation prevents flexing or bending. Flexing below –20 ºC (-4 ºF) may damage the cables.
Applications
The Bently Nevada 200152-04-CN is ideal for connecting accelerometers in machinery health monitoring systems, including turbines, compressors, pumps, and motors. Its IP67 sealing makes it suitable for environments with moisture, dust, or thermal shock. Use this cable to maintain accurate vibration data in critical rotating equipment, supporting predictive maintenance and reducing unplanned downtime.
Installation & Setup
When installing the 200152-04-CN, ensure the cable is routed with a bend radius greater than 73.7 mm to prevent damage. The connector on the accelerometer end should be tightened securely to achieve the IP67 seal. Avoid flexing the cable at temperatures below -20 ºC. For best performance, secure the cable to avoid vibration-induced wear.
Maintenance & Reliability
Regularly inspect the cable for cuts, abrasions, or connector damage. The molded connectors and DC4 compound provide long-term moisture resistance, but periodic checks in harsh environments are recommended. Proper installation and handling will extend service life and maintain signal integrity.
Selection Guide
Before ordering, verify the cable length and coupling nut options match your application. The 200152-04-CN is a standard accelerometer interface cable; confirm compatibility with your Bently Nevada transducers and monitoring systems. For reliable sourcing and competitive pricing, choose PLC Source PRO as your industrial automation parts supplier.