Product Overview
The Allen-Bradley 150-F25FCD is a solid-state smart motor controller from the SMC-Flex series, designed to provide microcomputer-controlled starting for three-phase induction motors. This Industrial Automation Module comes in a NEMA Type 4/12 (IP65) rated enclosure, making it suitable for demanding industrial environments where dust and water ingress are concerns.
With a controller rating of 25 A and 15 Hp at 460V AC, the 150-F25FCD handles moderate-power motor applications efficiently. Its input line voltage range of 500-575V AC (3-phase, 50/60 Hz) allows flexible integration into various power systems.
Key Technical Specifications
| Specification |
Value |
| Manufacturer |
Allen-Bradley |
| Category |
Drives |
| Product Line |
SMC-Flex |
| Part Number |
150-F25FCD |
| Weight |
20.00 lbs (9.07 kg) |
| Enclosure Type |
IP65 (Type 4/12) |
| Controller Rating |
25 A, 15 Hp @ 460V AC |
| Input Line Voltage |
500-575V AC, 3-phase, 50/60 Hz |
| Control Voltage |
100-240V AC (5-480 A units) |
| Rated Voltage |
500/575V AC |
The 150-F25FCD features a modular design that simplifies installation and maintenance. Built-in connections and a DPI communication interface support multiple network types, including DeviceNet, ControlNet, Ethernet, Remote I/O, and Profibus, enabling seamless integration into existing control architectures.
Performance and Protection
This controller offers seven operating modes: soft start, current limit start, dual ramp, full voltage, linear speed acceleration, pre-set slow speed, and soft stop. These modes allow precise control over motor acceleration and deceleration, reducing mechanical stress and extending equipment life.
Protective features include voltage unbalance, undervoltage, overvoltage, over-temperature, stall protection, and jam detection. The 150-F25FCD also incorporates DV/DT protection via an RC snubber network and transient line protection using a metal oxide varistor. LED indicators provide clear status feedback.
Installation and Setup
When installing the 150-F25FCD, ensure the enclosure is properly grounded and that all connections comply with local electrical codes. The controller's IP65 rating allows mounting in washdown or dusty areas, but always verify ambient conditions stay within the operating temperature range of -5 to 40°C (23 to 104°F). Use appropriate conduit fittings to maintain the enclosure seal.
During setup, configure the operating mode, ramp times, and current limits via the built-in keypad and LCD. Test all protective functions before putting the motor into service.
Maintenance and Reliability
Regular inspection of the 150-F25FCD is straightforward. Check for loose connections, signs of overheating, and ensure the enclosure gaskets remain intact to preserve the IP65 rating. Clean the exterior with a dry cloth; avoid using water or solvents that could penetrate the enclosure.
Given its robust construction and protective features, the 150-F25FCD delivers reliable long-term performance, reducing downtime and maintenance costs. Its shock and vibration tolerance (15G for 11ms, 1G vibration) ensures stable operation in harsh industrial settings.
Compatibility and Integration
The DPI communication interface makes the 150-F25FCD compatible with a wide range of control networks, including DeviceNet, ControlNet, Ethernet, Remote I/O, and Profibus. This flexibility allows you to integrate the controller into new or existing automation systems with minimal effort.
Before purchasing, verify that your control system supports one of these protocols and that the input voltage matches your plant supply. The controller's control voltage range (100-240V AC) accommodates various control circuits.
Selection Guide
When selecting a motor controller, confirm the motor's full-load current and horsepower ratings align with the 150-F25FCD's capabilities (25 A, 15 Hp @ 460V AC). Check the supply voltage and frequency to ensure compatibility (500-575V AC, 3-phase, 50/60 Hz).
PLC Source PRO offers this genuine Allen-Bradley 150-F25FCD with fast shipping and competitive pricing. For additional technical support or to verify stock, contact our team.