Product Overview
The Bently Nevada 330101-00-22-10-02-CN is a 3300 XL 8 mm proximity probe with a 3/8-24 UNF thread and no armor. It provides a 2 mm (80 mil) linear range and a standard 1.0 metre miniature coaxial ClickLoc cable, making it a direct replacement for radial vibration and axial position measurements in machinery protection systems. The 330101-00-22-10-02-CN belongs to the 3300 XL series and is manufactured in the U.S.A.
Technical Specifications
| Parameter |
Value |
| Probe Type |
3300 XL 8 mm, 3/8-24 UNF thread, without armor |
| Overall Case Length |
2.2 in (option 22) |
| Total Length |
1.0 metre (3.3 feet) (option 10) |
| Connector Type |
Miniature coaxial ClickLoc, standard cable (option 02) |
| Linear Range |
2 mm (80 mils), from 0.25 to 2.3 mm (10 to 90 mils) |
| Recommended Gap Setting |
-9 Vdc [approx. 1.27 mm (50 mils)] |
| Incremental Scale Factor (ISF) |
7.87 V/mm (200 mV/mil) ±5% for 1 m system, 0°C to +45°C |
| Deviation from Best Fit Straight Line |
Less than ±0.025 mm (±1 mil) for 1 m system, 0°C to +45°C |
| Nominal Probe DC Resistance (RPROBE) |
7.59 ± 0.50 Ω at 1.0 m |
| Extension Cable Capacitance |
69.9 pF/m (21.3 pF/ft) typical |
| Probe Tip Material |
Polyphenylene sulfide (PPS) |
| Probe Case Material |
AISI 303 or 304 stainless steel |
| Weight |
323 g/m (11.4 oz) |
| Operating Temperature (Standard Probe) |
-52°C to +177°C (-62°F to +350°F) |
| Relative Humidity |
Less than 3% change in ASF at 93% humidity per IEC 68-2-3 for up to 56 days |
Applications
The 330101-00-22-10-02-CN suits radial vibration monitoring on compressors, turbines, and pumps where a 2 mm linear range and -9 Vdc gap setting are required. Its 1.0 metre cable with ClickLoc connector simplifies installation in tight machine housings. The 8 mm probe body provides thicker PPS encapsulation and a stronger stainless steel case for robustness against physical abuse. PLC Source PRO supplies genuine Bently Nevada parts with fast quote response and technical support for selecting the correct probe and extension cable.
Compatibility and Selection Guide
The 330101-00-22-10-02-CN works with 3300 XL Proximitor sensors and extension cables. Field wiring should use 3-conductor shielded triad cable with 0.2 to 1.5 mm² (16 to 24 AWG) tinned wire, with maximum length of 305 metres (1,000 feet) between the Proximitor sensor and monitor. For extended temperature range applications, select an ETR probe option. The patented TipLoc and CableLoc designs provide a robust bond and 330 N (75 lbf) pull strength. Confirm agency approval requirements for your country before ordering.