Product Overview
The Allen-Bradley 1763-L16DWD is a compact programmable logic controller from the MicroLogix 1100 series. Designed for small to mid-sized automation tasks, this controller integrates 16 I/O points into a single unit, reducing panel space and simplifying wiring. With both discrete and analog inputs, plus relay outputs, the 1763-L16DWD handles a wide range of sensing and control applications.
Built for reliability, the 1763-L16DWD supports 12/24 VDC input signals and provides two 0-10 VDC analog inputs. Its built-in Ethernet and RS-232/485 communication ports enable easy integration with HMIs, SCADA systems, and programming tools. The LCD display and keypad allow on-site monitoring and parameter adjustments without needing a PC.
Technical Specifications
Key specifications for the Allen-Bradley 1763-L16DWD:
| Specification |
Value |
| Manufacturer |
Rockwell Automation |
| Brand |
Allen-Bradley |
| Part Number |
1763-L16DWD |
| Series |
MicroLogix 1100 |
| Product Type |
Programmable Controller |
| Input Power |
120 to 240 Volts AC |
| Point Count |
16 Points |
| Digital Inputs |
12/24V dc sink/source (standard and high-speed) |
| Analog Inputs |
(2) Voltage Input |
| Analog Voltage Range |
0-10VDC |
| Analog Data Type |
10-bit unsigned integer |
| Analog Resolution |
10 Bit |
| Digital Outputs |
(6) Relay |
| Communication Port |
1 RS-232 / 485; 1 Ethernet |
| Display Type |
LCD |
| Dimensions |
3.5 x 4.33 x 3.43 inches |
These specifications confirm the 1763-L16DWD is a flexible controller suitable for various industrial applications.
Industry Applications
The 1763-L16DWD excels in applications requiring mixed signal handling. For example, in a packaging line, the digital inputs monitor sensor positions, while the analog inputs read pressure or temperature transmitters. The relay outputs then actuate solenoids or motor starters.
In HVAC systems, the 1763-L16DWD can manage damper actuators based on analog temperature readings. Its Ethernet port allows remote monitoring and data logging, making it ideal for energy management.
For water treatment, the controller can sequence pumps using digital inputs from float switches and analog inputs from flow meters. The relay outputs drive contactors, and the RS-232 port connects to a local HMI for operator interface.
Installation & Setup
Mount the 1763-L16DWD horizontally on a DIN rail or directly on a panel. Ensure adequate clearance for ventilation and wiring. Use recommended wire sizes: 12-20 AWG solid or 14-20 AWG stranded for power and input connections. For analog signals, use Belden #8761 cable, which includes a drain wire and foil shield for grounding.
When wiring, keep analog and digital lines separated to minimize noise. Connect the shield at one end only to avoid ground loops. After mounting, verify the input power is within the 120-240 VAC range before energizing the controller.
Maintenance & Reliability
Routine maintenance for the 1763-L16DWD is minimal. Periodically check terminal connections for tightness and inspect the unit for dust accumulation. The internal battery backs up the volatile RAM; replace it every few years to preserve program memory during power loss.
Operate the controller within its temperature range of -20 to 65°C to ensure reliable performance. The relay outputs have a mechanical life of 10,000,000 cycles, but contact wear depends on load current. For high-current loads, consider using external contactors to extend relay life.
Compatibility & Integration
The 1763-L16DWD integrates seamlessly with other Rockwell Automation products. It supports up to four 1762 MicroLogix expansion modules, allowing you to increase I/O as needed. The built-in RS-232/485 port supports DF1, DH485, MODBUS, and ASCII protocols, enabling communication with third-party devices.
The Ethernet port supports EtherNet/IP, making it easy to connect to PlantPAx or other SCADA systems. You can also use it for programming and data exchange with RSLogix 500 software.
Selection Guide
Before purchasing, verify that the 1763-L16DWD meets your I/O count and signal types. Consider the number of analog inputs and relay outputs required for your application. Also, confirm that the input power (120-240 VAC) matches your facility’s supply.
PLC Source PRO offers genuine Allen-Bradley parts with fast shipping. Our knowledgeable staff can help you confirm compatibility and availability.