Product Overview
The GE IS220PVIBH1AL is a Vibration Monitor (PVIB) pack engineered for the Mark VIe control system. This industrial automation module electrically connects one or two I/O Ethernet networks to the TVBA vibration terminal board. It integrates a processor board, an acquisition board, and a daughterboard—all common to Mark VIe distributed I/O packs.
With 13 channels dedicated to proximity and vibration sensing, the IS220PVIBH1AL reads data from Proximitors, integrated output accelerometers (channels 1–3 only), Velomitors, and seismic sensors. Channels 9–12 support only Proximitors, while channel 13 accepts either a Keyphasor signal or a proximity-type signal. Dual RJ45 Ethernet ports and a 3-pin power input supply the pack, and a DC-37 pin connector links directly to the terminal board. Four indicator LEDs provide visual diagnostics.
Technical Specifications
| Specification |
Value |
| Manufacturer |
General Electric |
| Series |
Mark VIe |
| Part Number |
IS220PVIBH1AL |
| Product Type |
Vibration Monitor (PVIB) pack |
| Channels |
13 for proximity and vibration |
| Common Mode Voltage |
Min. 5 VDC |
| CMRR at 50/60 Hz |
-50 dB |
| Frame Rates |
3.125, 6.25, 12.5, 25, 50, and 100 Hz |
| Ambient Temperature Range |
-30 to 65 °C |
| Board Compatibility |
Vibration Terminal Board (TVBA) |
| LED Indicators |
4 (Attn, Pwr, Link, TxRx) |
| Probe Power |
-24 VDC, 12 mA load per transducer |
| Dimensions |
8.26 cm high x 4.19 cm wide x 12.1 cm deep |
| Weight |
1 lb |
Key Features & Benefits
-
Dual Ethernet Connectivity: Two independent 10/100 Ethernet ports support redundant network paths, ensuring continuous operation even if one network fails.
-
Versatile Sensor Support: Compatible with Proximitors, Velomitors, accelerometers, and seismic sensors across 13 channels.
-
Auto-Reconfiguration: Swapping I/O packs is simplified—the controller automatically downloads the correct configuration, reducing downtime.
-
Robust Design: Withstands temperatures from -30 to 65 °C, suitable for demanding industrial environments.
-
Diagnostic LEDs: Four status LEDs (Attn, Pwr, Link, TxRx) provide at-a-glance operational feedback.
Installation & Setup
Installing the IS220PVIBH1AL is straightforward. Secure the TVBA terminal board, then connect the PVIB pack directly to the terminal board connectors. Use the threaded studs near the Ethernet ports for mechanical stability. Connect one or two Ethernet cables—when using dual connections, ENET1 should link to the network associated with the R controller. Plug in the 3-pin power connector, then configure the pack using ToolboxST*. Finally, verify that the N28 power supply daughterboard on the TVBA is properly seated.
Maintenance & Reliability
The IS220PVIBH1AL is built for long-term reliability in harsh industrial settings. Its wide operating temperature range (-30 to 65 °C) ensures stable performance in extreme conditions. Routine inspection of the Ethernet connections and power input helps maintain signal integrity. The auto-reconfiguration feature reduces maintenance effort by eliminating manual reconfiguration after module swaps, directly lowering downtime and operational costs.
Compatibility & Integration
As part of the Mark VIe family, the IS220PVIBH1AL integrates seamlessly with GE's distributed I/O architecture. It connects to the TVBA vibration terminal board and supports dual Ethernet networks for redundant control. The pack is designed for use with GE's ToolboxST* configuration software and works with both single and dual Ethernet configurations.
Buying Guide
Before purchasing the GE IS220PVIBH1AL, verify your system's compatibility with Mark VIe distributed I/O packs and confirm the terminal board model (TVBA). Ensure that your power supply meets the -24 VDC probe power requirement. For expert assistance and genuine parts, choose PLC Source PRO as your reliable supplier.