Product Overview
The GE IC693BEM332 is a FIP I/O Interface Module for the Series 90-30 programmable logic controller family. It acts as a master controller and communication gateway, linking remote field devices to the PLC via the Factory Instrumentation Protocol at a transmission speed of 2.5 MHz. The module features two Type D 9-pin serial connectors supporting RS-482 and RS-422 protocols, and it draws 5V DC power from the Series 90-30 backplane.
Technical Specifications
| Specification |
Value |
| Brand |
GE Fanuc |
| Part Number |
IC693BEM332 |
| Series |
Series 90-30 |
| Component Type |
FIP I/O Interface Module |
| Communication Protocol |
Factory Instrumentation Protocol (FIP) |
| Transmission Speed |
2.5 MHz |
| Number of Serial Ports |
2 |
| Serial Protocols Supported |
RS-482 and RS-422 |
| Power Supply |
5V DC from Series 90-30 Backplane |
| Current Rating |
300 mA |
| IP Rating |
IP 20 |
Applications
The GE IC693BEM332 serves as the main communication gateway in FIP-based industrial networks. It connects remote field devices to the Series 90-30 PLC in manufacturing and process control environments. Typical uses include linking sensors, actuators, and remote I/O racks over the FIP bus. The module does not supply power to field devices, so external power supplies are required for connected equipment. For genuine GE Fanuc parts and fast quote response, PLC Source PRO supplies the IC693BEM332 to keep your Series 90-30 system running.
Compatibility and Installation
The IC693BEM332 is compatible with Series 90-30 PLC backplanes and draws 5V DC power directly from the backplane. It is configured using handheld devices or proprietary computer software sold separately. The module has an IP 20 rating and open-type construction, so it must be installed in a closed panel to protect against moisture, dirt, and extreme temperatures. Two Type D 9-pin serial connectors on the front panel support RS-482 and RS-422 communication.
Selection Guide
- Verify your Series 90-30 PLC system requires a FIP I/O interface module.
- Confirm field devices use FIP protocol and RS-482 or RS-422 serial communication.
- Ensure external power supplies are available for field devices, as the module does not provide field power.
- Plan for installation inside a closed panel to meet IP 20 environmental limits.