{"product_id":"schneider-bmxcps2000-power-supply-module-modicon-x80-series","title":"Schneider BMXCPS2000 Power Supply Module-Modicon X80 Series","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eSchneider BMXCPS2000\u003c\/strong\u003e is a reliable power supply module belonging to the Modicon X80 platform. It converts 100...240 V AC input into three regulated DC outputs: 3.3 V (8.3 W) for I\/O module logic, 24 V (16.8 W) for I\/O modules and processor, and an additional 24 V (10.8 W) for sensor supply. With a total output power of 20 W and multiple protection circuits, the \u003cstrong\u003eBMXCPS2000\u003c\/strong\u003e ensures stable operation in demanding industrial environments.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications Breakdown\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eSchneider BMXCPS2000\u003c\/strong\u003e offers precise electrical performance. Below are key parameters:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrimary Voltage:\u003c\/strong\u003e 100...240 V AC (85...264 V limit)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Frequency:\u003c\/strong\u003e 50\/60 Hz (47…63 Hz limits)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSecondary Power Outputs:\u003c\/strong\u003e 8.3 W at 3.3 V DC for logic, 16.8 W at 24 V DC for I\/O\/processor, 10.8 W at 24 V DC for sensors\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInrush Current:\u003c\/strong\u003e 30 A at 120 V, 60 A at 240 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e Overload, overvoltage, and short-circuit on secondary circuits; internal fuse on primary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStatus LEDs:\u003c\/strong\u003e Green for rack voltage OK and sensor voltage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation Resistance:\u003c\/strong\u003e ≥100 MOhm primary\/ground and primary\/secondary\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDielectric Strength:\u003c\/strong\u003e 1500 V primary\/secondary for logic and I\/O power, 2300 V for sensor power\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNet Weight:\u003c\/strong\u003e 0.3 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese specifications make the \u003cstrong\u003eSchneider BMXCPS2000\u003c\/strong\u003e a robust choice for systems requiring separate power rails with galvanic isolation.\u003c\/p\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eSchneider BMXCPS2000\u003c\/strong\u003e is ideal for factory automation, process control, and machinery where a Modicon X80 backplane is used (excluding BMEXBP..02 backplanes). Its triple-output design simplifies wiring by providing dedicated power for sensors, I\/O modules, and processor logic. For example, in a packaging line, the 24 V sensor supply powers proximity sensors while the 3.3 V logic rail runs the local I\/O modules — all from a single \u003cstrong\u003eBMXCPS2000\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003eIn a water treatment plant, the Schneider BMXCPS2000 can feed a remote rack with up to 16.8 W for 24 V I\/O modules, ensuring clean power with overvoltage and short-circuit protection. This reduces downtime and simplifies troubleshooting.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eMount the \u003cstrong\u003eSchneider BMXCPS2000\u003c\/strong\u003e onto a compatible Modicon X80 rack (DO NOT use with BMEXBP..02 backplanes). Connect the AC line supply (100...240 V, 50\/60 Hz) to the 5‑pin connector, ensuring a protective earth connection. The 2‑pin alarm relay connector can be wired to a remote monitoring system. After power-up, verify the green LEDs for rack voltage and sensor voltage. The RESET push-button performs a cold restart of the module. Observe IP20 protection – install in a clean, dry cabinet.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eRoutine inspection includes checking LED status and verifying output voltages. The \u003cstrong\u003eSchneider BMXCPS2000\u003c\/strong\u003e operates from 0 to 60 °C and withstands storage from -40 to 85 °C. Its shock resistance (30 gn) and vibration resistance (3 gn) suit harsh industrial settings. The internal fuse is not user-accessible; if the primary fuse blows, return the module for service. Regular cleaning of the enclosure (IP20) ensures adequate cooling. The module’s built-in overload and short-circuit protection minimize risk of downstream damage, contributing to long service life.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore purchasing a \u003cstrong\u003eSchneider BMXCPS2000\u003c\/strong\u003e, verify your backplane type (incompatible with BMEXBP..02) and total power demand of your I\/O modules. The \u003cstrong\u003eBMXCPS2000\u003c\/strong\u003e delivers up to 20 W combined; ensure your system load stays within limits. For added reliability, consider a redundant configuration with two power supply modules. UBEST Automation stocks genuine \u003cstrong\u003eSchneider BMXCPS2000\u003c\/strong\u003e units with fast shipping. Contact us for volume discounts or to confirm compatibility with your existing Modicon X80 system.\u003c\/p\u003e","brand":"Schneider","offers":[{"title":"Default","offer_id":44403944915043,"sku":"BMXCPS2000","price":284.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/BMXCPS2000_1.jpg?v=1785015228","url":"https:\/\/www.plcsourcepro.com\/products\/schneider-bmxcps2000-power-supply-module-modicon-x80-series","provider":"PLC Source PRO","version":"1.0","type":"link"}