{"product_id":"schneider-bmep582040h-industrial-automation-module","title":"Schneider BMEP582040H Industrial Automation Module","description":"\u003ch2\u003eProduct Introduction\u003c\/h2\u003e\u003cp\u003eThe Schneider BMEP582040H Modicon M580 processor module is engineered for severe environments, delivering robust performance in demanding industrial automation applications. With a high MTBF of 775,000 hours and resilience to extreme temperatures (-25 to 70 °C), this module minimizes downtime and reduces total cost of ownership. It supports up to 2048 discrete and 512 analog I\/O points across 4 racks, making it a versatile choice for process control, motion control, and remote I\/O stations.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eRange of Product\u003c\/td\u003e\n\u003ctd\u003eModicon M580\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct or Component Type\u003c\/td\u003e\n\u003ctd\u003eProcessor module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNumber of racks\u003c\/td\u003e\n\u003ctd\u003e4\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal I\/O processor capacity (discrete)\u003c\/td\u003e\n\u003ctd\u003e2048 I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLocal I\/O processor capacity (analog)\u003c\/td\u003e\n\u003ctd\u003e512 I\/O\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMemory description\u003c\/td\u003e\n\u003ctd\u003eExpandable flash, 4 GB data storage; Integrated RAM: 10 kB system, 8 MB program, 768 kB data\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCurrent consumption\u003c\/td\u003e\n\u003ctd\u003e270 mA 24 V DC\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMTBF reliability\u003c\/td\u003e\n\u003ctd\u003e775,000 H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIP Degree of Protection\u003c\/td\u003e\n\u003ctd\u003eIP20\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmbient air temperature for operation\u003c\/td\u003e\n\u003ctd\u003e-13…158 °F (-25…70 °C)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock resistance\u003c\/td\u003e\n\u003ctd\u003e30 gn\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNet Weight\u003c\/td\u003e\n\u003ctd\u003e1.872 lb (0.849 kg)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eReal-World Applications\u003c\/h2\u003e\u003cp\u003eThe Schneider BMEP582040H excels in harsh process industries such as oil and gas, chemical plants, and water treatment. Its gas-resistant conformal coating and compliance with ATEX\/IECEx zone 2\/22 make it suitable for hazardous locations. In a typical refinery, the BMEP582040H manages HART transmitters and SSI encoders for precise level control. The long MTBF reduces unplanned maintenance, delivering measurable ROI over the asset's lifecycle.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eInstall the BMEP582040H in a Modicon M580 rack using the internal power supply via the rack backplane. The module occupies one slot and requires 270 mA at 24 V DC. Connect the Ethernet TCP\/IP service port (1 port) and device network ports (2 ports) to your control network. Use the mini-B USB port for direct programming. The status LEDs—RUN, ERR, I\/O, DL, BACKUP, ETH MS, and Eth NS—provide immediate diagnostic feedback during commissioning.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eWith an MTBF of 775,000 hours, the Schneider BMEP582040H delivers exceptional reliability. Routine inspections should focus on ambient temperature (maintain below 70 °C) and relative humidity (5–95% at 55 °C without condensation). The conformal coating protects against gas, dust, sand, and mold growth (class Gx\/3C4\/3S4). Periodically check the expandable flash memory (4 GB) for data backup and replace the memory card if the BACKUP LED turns red.\u003c\/p\u003e\u003ch2\u003eCompatibility \u0026amp; Integration\u003c\/h2\u003e\u003cp\u003eThe BMEP582040H integrates seamlessly into Modicon M580 architectures. It supports up to 8 remote I\/O stations and 64 distributed devices via RIO and DIO scanners. Communication modules include 2 Ethernet modules and 16 AS-Interface modules. The processor handles 64 event tasks and a periodic fast task for time-critical control. It is fully compliant with IEC 61131-2 and multiple international standards (CE, UL, CSA, RCM, EAC, Merchant Navy).\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore purchasing, verify your rack compatibility (Modicon M580) and I\/O count. The Schneider BMEP582040H comes in a single unit package (PCE) weighing 1.872 lb. For volume needs, a six-unit S03 package is available. PLC Source PRO (available via ubest101) stocks this module and ensures fast delivery for industrial spares. Contact our team to confirm stock and lead times.\u003c\/p\u003e","brand":"Schneider","offers":[{"title":"Default","offer_id":44417274740835,"sku":"BMEP582040H","price":292.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/BMEP582040H_20405489-bc0a-4058-8452-bd7e19004e5c.jpg?v=1785272831","url":"https:\/\/www.plcsourcepro.com\/products\/schneider-bmep582040h-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}