{"product_id":"honeywell-900g01-0202-digital-input-module-contact-closure-type","title":"Honeywell 900G01-0202 Digital Input Module-Contact Closure Type","description":"\u003ch2\u003eProduct Introduction\u003c\/h2\u003e\u003cp\u003eWhen reliable contact monitoring is critical in automated processes, the \u003cstrong\u003eHoneywell 900G01-0202\u003c\/strong\u003e (900G01-0202) provides a robust digital input solution. This contact-type module is designed for industrial environments where simple on\/off sensing from switches, relays, or proximity devices is needed. With self-powered 15VDC supplied to external switching hardware, the module directly monitors contact closures and eliminates the need for additional power supplies in many applications.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eInputs per module\u003c\/td\u003e\n\u003ctd\u003e16 (single-ended)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eVoltage supplied by controller\u003c\/td\u003e\n\u003ctd\u003e15 VDC normal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum contact resistance\u003c\/td\u003e\n\u003ctd\u003e1000 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGalvanic isolation\u003c\/td\u003e\n\u003ctd\u003eBetween field wiring and module\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOFF to ON response time\u003c\/td\u003e\n\u003ctd\u003e4 ms max (excluding scan\/transmission time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eON to OFF response time\u003c\/td\u003e\n\u003ctd\u003e6 ms max (excluding scan\/transmission time)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSwitching current\u003c\/td\u003e\n\u003ctd\u003e2.6 mA nominal\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThe \u003cstrong\u003eHoneywell 900G01-0202\u003c\/strong\u003e (900G01-0202) features 16 single-ended inputs with a self-powered 15VDC loop. It supports contact resistances up to 1000 ohms, making it tolerant of slightly degraded switch contacts. Fast response times (4 ms OFF→ON, 6 ms ON→OFF) ensure accurate state detection even in high-speed cycles. Galvanic isolation between field wiring and the module protects the controller from electrical noise and ground loops.\u003c\/p\u003e\u003ch2\u003eApplication Scenarios\u003c\/h2\u003e\u003cp\u003eThis module excels in discrete manufacturing and process control where limit switches, push buttons, and relay contacts must be monitored. For example, in a conveyor system, the \u003cstrong\u003eHoneywell 900G01-0202\u003c\/strong\u003e (900G01-0202) can capture on\/off states from proximity sensors at each station. The green LED per channel provides immediate visual confirmation of each input state, speeding troubleshooting. Its self-powered nature reduces wiring complexity and inventory costs.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eField wiring connects to the four common terminals, simplifying termination. Verify that the external switches have a closed resistance below 1000 ohms and an open resistance above that threshold. Use twisted-pair shielded cable for long runs to preserve signal integrity. The module automatically scans its inputs; ensure the backplane communication is properly configured in the controller logic. When inverting the logic state is required, use the controller's logic blocks rather than rewiring.\u003c\/p\u003e\u003ch2\u003eTroubleshooting \u0026amp; Common Issues\u003c\/h2\u003e\u003cp\u003eIf an input fails to register as ON, first check the external switch contact resistance—corroded contacts may exceed 1000 ohms. Inspect the green input LED: if it does not light when the switch is closed, measure 15VDC at the terminal. The blinking green status LED indicates active scanning; if steady red, a module fault exists. For intermittent issues, secure all field wiring connections and verify isolation from high-voltage cables.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore ordering the \u003cstrong\u003eHoneywell 900G01-0202\u003c\/strong\u003e (900G01-0202), confirm your controller supports this type of digital input module and that the backplane slots match. No external power supply is required for the input loop, but ensure the controller backplane provides necessary power. For applications requiring higher isolation or different voltage levels, contact \u003cstrong\u003eUBEST Automation\u003c\/strong\u003e (ubest101) for alternative options. Stock availability and support are provided for this Honeywell module.\u003c\/p\u003e","brand":"Honeywell","offers":[{"title":"Default","offer_id":44404440694883,"sku":"900G01-0202","price":243.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/900G01-0202.jpg?v=1785063627","url":"https:\/\/www.plcsourcepro.com\/products\/honeywell-900g01-0202-digital-input-module-contact-closure-type","provider":"PLC Source PRO","version":"1.0","type":"link"}