{"product_id":"bently-nevada-9200-03-05-10-00-industrial-automation-module","title":"Bently Nevada 9200-03-05-10-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 9200-03-05-10-00\u003c\/strong\u003e Two-Wire Velocity Seismoprobe Transducer provides reliable vibration measurement for critical rotating equipment. This industrial automation module converts mechanical velocity into a proportional electrical signal, enabling proactive machine health monitoring. Designed for harsh environments, the \u003cstrong\u003eBently Nevada 9200-03-05-10-00\u003c\/strong\u003e offers robust performance with a sensitivity of 20 mV\/mm\/s (500 mV\/in\/s) and a minimum operating frequency of 4.5 Hz (270 cpm).\u003c\/p\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eReplace aging transducers or upgrade existing monitoring systems with the \u003cstrong\u003eBently Nevada 9200-03-05-10-00\u003c\/strong\u003e. Common applications include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbine Vibration Monitoring\u003c\/strong\u003e – Accurate measurement at 90° mounting angle ensures reliable data for steam and gas turbines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompressor Protection\u003c\/strong\u003e – The 25 mm\/s velocity range (1 in\/s at 100 Hz with 10 kΩ load) detects early bearing faults.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFan and Blower Condition Monitoring\u003c\/strong\u003e – Dust and moisture resistant construction (to 95% RH, noncondensing) suits difficult environments.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eMount the \u003cstrong\u003eBently Nevada 9200-03-05-10-00\u003c\/strong\u003e using the circular M10X1 stud base (option 10) at a 90° angle (±2.5°). Connect via the terminal block top mount (option 05). Calibrate with a 10 kΩ load across terminals A and B. Ensure proper orientation at the calibration angle for ±5% sensitivity accuracy. Operate within -29°C to +121°C (-20°F to +250°F) for the 9200 model.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe 9200-03-05-10-00 features an anodized aluminum A204 case and neoprene gasket for long service life. Inspect connections annually and verify coil resistance remains at 1.25 kΩ ±5%. The locked coil inductance of 125 mH (typical) should remain stable. Store in dry conditions; the unit is dust and moisture resistant but avoid submersion unless ordered with integral cable.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore ordering, confirm your required mounting angle (90° ±2.5° for this configuration), connector type (terminal block top mount), and agency approval needs (none for option 00). For technical support or replacement guidance, contact \u003cstrong\u003eubest101\u003c\/strong\u003e – a trusted source for genuine Bently Nevada parts. Ensure compatibility with your existing monitoring system’s input impedance (10 kΩ recommended).\u003c\/p\u003e\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\u003ch3\u003eWhat is the sensitivity tolerance of the 9200-03-05-10-00?\u003c\/h3\u003e\u003cp\u003eSensitivity is 20 mV\/mm\/s (500 mV\/in\/s) with ±5% accuracy when properly terminated and oriented at the calibration angle.\u003c\/p\u003e\u003ch3\u003eWhat is the maximum displacement this transducer can measure?\u003c\/h3\u003e\u003cp\u003eDynamic operating range is 2.54 mm (0.100 in) peak-to-peak maximum displacement.\u003c\/p\u003e\u003ch3\u003eCan this transducer be used in high humidity environments?\u003c\/h3\u003e\u003cp\u003eYes, it operates up to 95% RH noncondensing, and up to 100% non-submerged when ordered with integral cable.\u003c\/p\u003e\u003ch3\u003eWhat is the weight of the 9200-03-05-10-00?\u003c\/h3\u003e\u003cp\u003eWeight is approximately 300 grams (10.5 ounces) typical.\u003c\/p\u003e\u003ch3\u003eWhat temperature range does this module support?\u003c\/h3\u003e\u003cp\u003eOperating and storage temperature for the 9200 model is -29°C to +121°C (-20°F to +250°F).\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44416267976803,"sku":"9200-03-05-10-00","price":271.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/9200_20_281_29_811d508e-c739-4069-874e-af585f8b53d2.jpg?v=1785241896","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-9200-03-05-10-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}