{"product_id":"bently-nevada-330905-05-13-05-01-00-industrial-automation-module","title":"Bently Nevada 330905-05-13-05-01-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eWhen precise shaft vibration and position monitoring are critical for rotating machinery, the Bently Nevada 330905-05-13-05-01-00 delivers reliable, accurate data. This 3300 NSv proximity probe is designed for permanent installation in process compressors, turbines, and other industrial equipment where chemical resistance and side-view performance matter. The 330905-05-13-05-01-00 is mechanically and electrically interchangeable with previous 3300 RAM probes, making it a straightforward upgrade path for existing systems.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe 330905-05-13-05-01-00 offers a linear range of 1.5 mm (60 mils), starting at approximately 0.25 mm (10 mils) from the target. This provides a usable measurement window from 0.25 to 1.75 mm (10 to 70 mils), corresponding to roughly -1 to -13 Vdc output. The recommended gap setting is 1.0 mm (40 mils), ensuring optimal operation within the linear zone.\u003c\/p\u003e\u003cp\u003eKey performance parameters include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) with +12.5%\/-20% interchangeability error.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from Best Fit Straight Line (DSL):\u003c\/strong\u003e Less than ±0.06 mm (±2.3 mils).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 0 to 10 kHz with +0, -3 dB typical, even with up to 305 meters (1000 feet) of field wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe dc Resistance:\u003c\/strong\u003e 4.0 ± 0.5 ohms for the 0.5-meter probe length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable:\u003c\/strong\u003e Center conductor resistance 0.220 Ω\/m (0.067 Ω\/ft), shield resistance 0.066 Ω\/m (0.020 Ω\/ft), capacitance 69.9 pF\/m (21.3 pF\/ft) typical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring:\u003c\/strong\u003e 0.2 to 1.5 mm² (16 to 24 AWG), with 0.25 to 0.75 mm² (18 to 23 AWG) when using ferrules. A three-conductor shielded triad cable is recommended.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 75 Ω coaxial, FEP insulated, available in 0.5, 1, 5, or 7 meters total length.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating\/Storage Temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe 330905-05-13-05-01-00 excels in environments where chemical resistance is essential. Its increased chemical resistance compared to the 3300 RAM probe makes it suitable for many process compressor applications. The superior side-view characteristics also allow accurate gapping at the same distance from the target as the 3000-series 190 probe, but with better performance.\u003c\/p\u003e\u003cp\u003eTypical applications include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eVibration monitoring on centrifugal and reciprocating compressors\u003c\/li\u003e\n\u003cli\u003eAxial shaft position monitoring in turbines and generators\u003c\/li\u003e\n\u003cli\u003eEccentricity and differential expansion measurements in large rotating machinery\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen replacing older 3300 RAM probes, the 330905-05-13-05-01-00 provides a drop-in solution with improved chemical resistance, reducing downtime and maintenance costs.\u003c\/p\u003e\u003ch2\u003eInstallation and Setup\u003c\/h2\u003e\u003cp\u003eProper installation is critical for accurate measurements. Follow these guidelines:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMount the probe with the recommended torque of finger tight, and do not exceed 0.56 N•m (5 in•lb) maximum torque.\u003c\/li\u003e\n\u003cli\u003eFor M10X1 probe cases, the first three threads have a maximum rated torque of 22.6 N•m (200 in•lb) and a recommended torque of 7.5 N•m (66 in•lb).\u003c\/li\u003e\n\u003cli\u003eEnsure the probe tip is gapped at 1.0 mm (40 mils) from the target surface.\u003c\/li\u003e\n\u003cli\u003eMaintain a minimum bend radius of 25.4 mm (1.0 in) for the probe cable, with or without SST armor.\u003c\/li\u003e\n\u003cli\u003eUse the specified field wiring (0.2 to 1.5 mm² or 16 to 24 AWG) and keep the cable length between the Proximitor Sensor and monitor within 305 meters (1000 feet).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaintenance and Reliability\u003c\/h2\u003e\u003cp\u003eThe 330905-05-13-05-01-00 is built for long-term reliability in harsh industrial environments. Its PPS probe tip and AISI 304 SST case resist chemical attack and mechanical wear. The Viton O-ring seals the probe against differential pressure between the tip and case, but note that probes are not pressure-tested before shipment. If your application requires pressure seal verification, contact our custom design department.\u003c\/p\u003e\u003cp\u003eRegular inspection of the probe cable and connector is recommended to ensure signal integrity. Avoid exceeding the maximum torque values during installation or maintenance to prevent thread damage. The wide operating temperature range (-52°C to +177°C) ensures stable performance even in extreme conditions.\u003c\/p\u003e\u003ch2\u003eSelection Guide\u003c\/h2\u003e\u003cp\u003eWhen selecting a replacement probe, verify the thread size, unthreaded length, overall case length, and total cable length. The 330905-05-13-05-01-00 features an M10X1 thread, 50 mm unthreaded length, 130 mm overall case length, and a 0.5-meter cable with a miniature coaxial ClickLoc connector. This configuration is ideal for installations where a compact probe with a standard connector is required.\u003c\/p\u003e\u003cp\u003eFor expert advice on compatibility or to discuss your specific application, trust PLC Source PRO as your reliable industrial automation parts supplier. We offer new, original factory-packed products with a 12-month warranty.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482745139299,"sku":"330905-05-13-05-01-00","price":217.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330905_20_281_29_385f184f-7587-48b0-a49c-314033cad58c.jpg?v=1786821199","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330905-05-13-05-01-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}