{"product_id":"bently-nevada-330905-05-10-10-01-00-industrial-automation-module","title":"Bently Nevada 330905-05-10-10-01-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330905-05-10-10-01-00 is a 3300 NSv proximity probe engineered for reliable vibration and position monitoring in critical rotating machinery. This industrial automation module delivers precise, non-contact measurements even in harsh process environments. With a 1.0 meter total length, M10×1 thread, and miniature coaxial ClickLoc connector, the 330905-05-10-10-01-00 integrates seamlessly into existing 3300 XL monitoring systems.\u003c\/p\u003e\u003cp\u003eCompared to earlier 3300 RAM probes, the NSv design offers superior chemical resistance and improved side-view characteristics, making it ideal for process compressor applications. The probe and extension cable remain mechanically and electrically interchangeable with the previous generation, simplifying upgrades and spare part management.\u003c\/p\u003e\u003ch2\u003eKey Technical Specifications\u003c\/h2\u003e\u003cp\u003eThe following specifications are directly from the product datasheet for the Bently Nevada 330905-05-10-10-01-00:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e1.5 mm (60 mils), from 0.25 to 1.75 mm (10 to 70 mils) approximately -1 to -13 Vdc\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Gap Setting\u003c\/td\u003e\n\u003ctd\u003e1.0 mm (40 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncremental Scale Factor (ISF)\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil) +12.5%\/-20% including interchangeability error\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeviation from Best Fit Straight Line (DSL)\u003c\/td\u003e\n\u003ctd\u003eLess than ±0.06 mm (±2.3 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e0 to 10 kHz: +0, -3 dB typical with up to 305 meters (1000 feet) of field wiring\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe DC Resistance (1.0 m length)\u003c\/td\u003e\n\u003ctd\u003e4.2 ± 0.5 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Cable DC Resistance\u003c\/td\u003e\n\u003ctd\u003eCenter conductor: 0.220 Ω\/m (0.067 Ω\/ft); Shield: 0.066 Ω\/m (0.020 Ω\/ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Cable Capacitance\u003c\/td\u003e\n\u003ctd\u003e69.9 pF\/m (21.3 pF\/ft) typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable\u003c\/td\u003e\n\u003ctd\u003e75 Ω coaxial, FEP insulated; available in 0.5, 1, 5, or 7 meters\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Torque\u003c\/td\u003e\n\u003ctd\u003eFinger tight\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Torque\u003c\/td\u003e\n\u003ctd\u003e0.56 N•m (5 in•lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Bend Radius\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 in) with or without SST armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Thread\u003c\/td\u003e\n\u003ctd\u003eM10×1\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Thread Engagement\u003c\/td\u003e\n\u003ctd\u003e15 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector-to-Connector Torque (M10×1 first three threads)\u003c\/td\u003e\n\u003ctd\u003eMaximum: 22.6 N•m (200 in•lb); Recommended: 7.5 N•m (66 in•lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eReal-World Applications\u003c\/h2\u003e\u003cp\u003eThe 330905-05-10-10-01-00 excels in monitoring shaft vibration, axial position, and eccentricity in turbomachinery, compressors, and large electric motors. Its enhanced chemical resistance allows direct installation in process compressor applications where exposure to aggressive media is common.\u003c\/p\u003e\u003cp\u003eFor critical machinery protection, the probe pairs with a 3300 XL Proximitor Sensor and monitor, delivering accurate gap measurements over a 1.5 mm linear range. The side-view performance surpasses that of the older 3000-series 190 probe, ensuring reliable readings even when the probe is offset from the target.\u003c\/p\u003e\u003cp\u003eThe stainless steel case and PPS tip withstand extreme temperatures from -52°C to +177°C, making the 330905-05-10-10-01-00 suitable for both high-temperature turbine applications and low-temperature cryogenic processes.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eFor optimal performance, mount the Bently Nevada 330905-05-10-10-01-00 with the recommended gap of 1.0 mm (40 mils). Use the provided ClickLoc connector to attach the extension cable securely. Apply only finger tight torque when threading the probe into the mounting boss, and never exceed the maximum torque of 0.56 N•m (5 in•lb).\u003c\/p\u003e\u003cp\u003eField wiring should use three-conductor shielded triad cable with conductors sized 0.2 to 1.5 mm² (16 to 24 AWG). If ferrules are used, 0.25 to 0.75 mm² (18 to 23 AWG) is preferred. Keep the total field wiring length between the probe and the monitor to a maximum of 305 meters (1,000 feet). For longer runs, review the frequency response graphs to understand signal rolloff at high frequencies.\u003c\/p\u003e\u003cp\u003eWhen measuring axial position on shafts smaller than 13 mm (0.5 in) diameter, expect a change in scale factor. Reduce the gap between probe and target to minimize this effect.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe robust construction of the 330905-05-10-10-01-00 minimizes maintenance needs, but periodic inspection is recommended. Check the probe tip for contamination or damage, and verify that the connector remains clean and securely fastened.\u003c\/p\u003e\u003cp\u003eThe probe is designed to seal differential pressure between the tip and case using a Viton O-ring. Note that probes are not pressure tested prior to shipment; if your application requires a pressure seal test, contact the custom design department.\u003c\/p\u003e\u003cp\u003eWith a wide operating temperature range and corrosion-resistant materials, this industrial automation module delivers long service life, reducing downtime and replacement costs.\u003c\/p\u003e\u003ch2\u003eCompatibility \u0026amp; Integration\u003c\/h2\u003e\u003cp\u003eThe 330905-05-10-10-01-00 is mechanically and electrically compatible with the Bently Nevada 3300 XL Proximitor Sensor and the 3300 XL monitoring system. It is also interchangeable with the previous 3300 RAM probe and extension cable, allowing direct replacement in existing installations.\u003c\/p\u003e\u003cp\u003eThe miniature coaxial ClickLoc connector ensures a secure, repeatable connection with the extension cable, maintaining signal integrity over the full frequency range.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore ordering, confirm your required unthreaded length, overall case length, total length, connector type, and agency approval. The 330905-05-10-10-01-00 configuration includes a 50 mm unthreaded length, 100 mm overall case length, 1.0 meter total length, and a standard cable with connector protector, with no agency approval required.\u003c\/p\u003e\u003cp\u003eFor reliable sourcing, PLC Source PRO offers this Bently Nevada 330905-05-10-10-01-00 as a new, factory-packed unit with a 12-month warranty. Verify your system requirements against the specifications above to ensure the correct probe for your machinery.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482717909091,"sku":"330905-05-10-10-01-00","price":257.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330905_20_281_29_b7354dfc-86c9-4db4-99b4-821a77b5ed42.jpg?v=1786820445","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330905-05-10-10-01-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}