{"product_id":"bently-nevada-330905-05-08-05-02-05-industrial-automation-module","title":"Bently Nevada 330905-05-08-05-02-05 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview: Bently Nevada 330905-05-08-05-02-05\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330905-05-08-05-02-05 is a precision 3300 NSv proximity probe designed for reliable vibration and position monitoring in critical rotating machinery. This industrial automation module features an M10x1 thread, a 50 mm unthreaded length, an 80 mm overall case length, and a 0.5 meter cable with a miniature coaxial ClickLoc connector. It is mechanically and electrically interchangeable with the previous 3300 RAM probe, offering enhanced chemical resistance for demanding process compressor applications.\u003c\/p\u003e\u003ch2\u003eKey Technical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 1.5 mm (60 mils), from 0.25 to 1.75 mm (10 to 70 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) with interchangeability error +12.5%\/-20%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from Best Fit Straight Line (DSL):\u003c\/strong\u003e Less than ±0.06 mm (±2.3 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 0 to 10 kHz (+0, -3 dB) with up to 305 meters of field wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e 4.0 ± 0.5 ohms (for 0.5 m probe)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable Capacitance:\u003c\/strong\u003e 69.9 pF\/m typical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications and Use Cases\u003c\/h2\u003e\u003cp\u003eThe 330905-05-08-05-02-05 excels in vibration monitoring on turbomachinery, compressors, and pumps. Its superior side-view characteristics make it ideal for axial position measurements on shafts, even those smaller than 13 mm in diameter, where scale factor variations can be minimized by adjusting the gap. The enhanced chemical resistance supports use in process compressors where aggressive media may be present.\u003c\/p\u003e\u003ch2\u003eInstallation and Setup Guidance\u003c\/h2\u003e\u003cp\u003eInstall the probe with finger-tight torque, then apply a maximum of 0.56 N•m (5 in•lb) to secure it. For M10x1 probe cases, ensure the first three threads are engaged with a maximum rated torque of 22.6 N•m (200 in•lb) and recommended 7.5 N•m (66 in•lb). Maintain a minimum bend radius of 25.4 mm (1.0 in) for the cable. Connect using the miniature coaxial ClickLoc connector, ensuring a secure fit. For optimal linearity, set the gap to 1.0 mm (40 mils) from the target.\u003c\/p\u003e\u003ch2\u003eMaintenance and Reliability\u003c\/h2\u003e\u003cp\u003eThe 330905-05-08-05-02-05 is built for long service life with a PPS tip and stainless steel case. The Viton O-ring seals the probe against differential pressure, but probes are not pressure tested prior to shipment. If pressure sealing is critical, contact our custom design department for testing. Regularly inspect the cable for bends exceeding the minimum radius and verify connector tightness.\u003c\/p\u003e\u003ch2\u003eCompatibility and Integration\u003c\/h2\u003e\u003cp\u003eThis probe is designed for use with Bently Nevada 3300 XL NSv Proximitor Sensors and extension cables. Field wiring should use three-conductor shielded triad cable with a maximum length of 305 meters (1,000 feet) between the sensor and monitor. The probe is compatible with monitoring systems that accept standard proximity probe signals.\u003c\/p\u003e\u003ch2\u003eBuying Guide\u003c\/h2\u003e\u003cp\u003eBefore purchasing the 330905-05-08-05-02-05, verify your required cable length, thread type, and connector style. This model includes a 0.5 m cable, M10x1 thread, and ClickLoc connector. For other options, contact PLC Source PRO to ensure you receive the exact configuration for your application. All units are new and original in factory packing with a 12-month warranty.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482674524259,"sku":"330905-05-08-05-02-05","price":219.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330905_20_281_29_102dd1aa-a4a8-4a3e-8b9e-f187220854b6.jpg?v=1786818882","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330905-05-08-05-02-05-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}