{"product_id":"bently-nevada-330905-00-13-10-12-cn-industrial-automation-module","title":"Bently Nevada 330905-00-13-10-12-CN Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eWhen process compressor applications demand reliable vibration monitoring, the Bently Nevada 330905-00-13-10-12-CN 3300 NSv Proximity Probe delivers precise, continuous measurement. This industrial automation module is part of the 3300 NSv series, engineered for enhanced chemical resistance and superior side-view characteristics compared to earlier 3300 RAM probes. With a 1.0-meter (39 in) total length, M10X1 thread, and miniature coaxial ClickLoc connector with FluidLoc cable, this probe is ready for demanding environments.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe 330905-00-13-10-12-CN is built to exacting standards. Key parameters include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 1.5 mm (60 mils), from 0.25 to 1.75 mm (10 to 70 mils) – approximately -1 to -13 Vdc.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Gap Setting:\u003c\/strong\u003e 1.0 mm (40 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) ±12.5%\/-20% including interchangeability error.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from Best Fit Straight Line (DSL):\u003c\/strong\u003e Less than ±0.06 mm (±2.3 mils).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 0 to 10 kHz: +0, -3 dB typical, with up to 305 meters (1000 feet) of field wiring.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e 4.2 ± 0.5 ohms (for 1.0 m length).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable DC Resistance:\u003c\/strong\u003e Center conductor 0.220 Ω\/m, shield 0.066 Ω\/m.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable Capacitance:\u003c\/strong\u003e 69.9 pF\/m (21.3 pF\/ft) typical.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating\/Storage Temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 75 Ω coaxial, FEP insulated; available in 0.5, 1, 5, or 7 meter lengths.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Torque:\u003c\/strong\u003e Finger tight; maximum 0.56 N•m (5 in•lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 in).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThis proximity probe excels in process compressor applications where chemical resistance is critical. Its enhanced side-view characteristics allow accurate gapping even when space is constrained. Typical installations include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcess Compressors:\u003c\/strong\u003e Monitor shaft vibration and axial position to prevent catastrophic failures.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbo Machinery:\u003c\/strong\u003e Provide real-time data for predictive maintenance and protection systems.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIndustrial Pumps:\u003c\/strong\u003e Detect rotor instability and bearing wear early.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation ensures accurate readings. Follow these steps:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMount the probe using the M10X1 thread. Apply thread sealant if required, but do not exceed 11.3 N•m (100 in•lb) recommended torque for the probe case.\u003c\/li\u003e\n\u003cli\u003eFor the first three threads, torque to 7.5 N•m (66 in•lb) maximum to avoid thread damage.\u003c\/li\u003e\n\u003cli\u003eSet the gap to 1.0 mm (40 mils) using the recommended mounting procedure. Use a feeler gauge or calibration fixture.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with a minimum bend radius of 25.4 mm (1.0 in) to prevent internal damage.\u003c\/li\u003e\n\u003cli\u003eConnect the ClickLoc connector securely; ensure the FluidLoc cable is properly seated.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe 330905-00-13-10-12-CN requires minimal maintenance, but regular inspection of the cable and connector is advisable. Check for signs of chemical attack or physical damage, especially in harsh environments. The probe is designed to seal differential pressure between tip and case using a Viton O-ring; however, it is not pressure tested before shipment. If your application demands a pressure seal test, contact our custom design department. Routine checks every 6-12 months help prolong service life and avoid unexpected downtime.\u003c\/p\u003e\u003ch2\u003eCompatibility \u0026amp; Integration\u003c\/h2\u003e\u003cp\u003eThis probe is mechanically and electrically interchangeable with Bently Nevada's previous 3300 RAM proximity probe and extension cable. It works seamlessly with 3300 XL NSv Proximitor Sensors and standard monitoring systems. For field wiring, use a three-conductor shielded triad cable with conductor sizes 0.2 to 1.5 mm² (16 to 24 AWG). Maximum field wiring length is 305 meters (1,000 feet) between the sensor and monitor.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore ordering, verify the total length, connector type, and agency approval options to match your system. This model comes with a miniature coaxial ClickLoc connector and FluidLoc cable, unthreaded length 0 mm, overall case length 130 mm, and total length 1.0 meter. It is a country-specific variant. For guaranteed quality, purchase from PLC Source PRO, a trusted supplier of industrial automation spares. We provide new, original factory-packed units with a 12-month warranty.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482594340963,"sku":"330905-00-13-10-12-CN","price":278.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330905-00-16-10-02-05_6ae05f31-5e27-4e0d-852b-1ac8aee4bc4b.jpg?v=1786815083","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330905-00-13-10-12-cn-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}