{"product_id":"bently-nevada-330905-00-08-05-01-00-industrial-automation-module","title":"Bently Nevada 330905-00-08-05-01-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330905-00-08-05-01-00 is a 3300 NSv proximity probe designed for reliable vibration and position monitoring in critical rotating machinery. This industrial automation module delivers precise measurements with a linear range of 1.5 mm and an incremental scale factor of 7.87 V\/mm, ensuring accurate data for predictive maintenance and machine protection.\u003c\/p\u003e\u003cp\u003eThis specific configuration features an M10x1 threaded case without armor, an 80 mm overall case length, and a 0.5 meter cable with a miniature coaxial ClickLoc connector and connector protector. The probe is mechanically and electrically interchangeable with the previous 3300 RAM probe, offering enhanced chemical resistance for demanding process compressor applications.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLinear Range\u003c\/td\u003e\n\u003ctd\u003e1.5 mm (60 mils) from 0.25 to 1.75 mm (10 to 70 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Gap Setting\u003c\/td\u003e\n\u003ctd\u003e1.0 mm (40 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eIncremental Scale Factor (ISF)\u003c\/td\u003e\n\u003ctd\u003e7.87 V\/mm (200 mV\/mil) ±12.5%\/-20%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDeviation from Best Fit Straight Line (DSL)\u003c\/td\u003e\n\u003ctd\u003eLess than ±0.06 mm (±2.3 mils)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e0 to 10 kHz: +0, -3 dB typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe dc Resistance (0.5 m length)\u003c\/td\u003e\n\u003ctd\u003e4.0 ± 0.5 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eExtension Cable Capacitance\u003c\/td\u003e\n\u003ctd\u003e69.9 pF\/m (21.3 pF\/ft) typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Bend Radius\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese specifications ensure the 330905-00-08-05-01-00 delivers consistent performance across its entire operating range, making it suitable for high-vibration environments.\u003c\/p\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330905-00-08-05-01-00 excels in applications requiring precise shaft vibration and position monitoring. Typical use cases include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcess Compressors:\u003c\/strong\u003e The enhanced chemical resistance of the NSv probe allows reliable operation in harsh media environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbomachinery:\u003c\/strong\u003e Monitor radial and axial shaft motion to detect misalignment, unbalance, or bearing wear early.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePumps and Fans:\u003c\/strong\u003e Provide continuous protection against excessive vibration that could lead to catastrophic failure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIn each scenario, the 330905-00-08-05-01-00 helps reduce unplanned downtime by delivering accurate, real-time data to your condition monitoring system.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation is critical for optimal performance. Follow these guidelines when mounting the 330905-00-08-05-01-00:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eThread the probe into the mounting hole using finger-tight torque initially, then tighten to a maximum of 0.56 N·m (5 in·lb).\u003c\/li\u003e\n\u003cli\u003eEnsure the target surface is clean and free of runout. For flat targets, use a minimum diameter of 8.9 mm (0.35 in); a recommended minimum of 13 mm (0.5 in) is advised for consistent scale factor.\u003c\/li\u003e\n\u003cli\u003eSet the initial gap to 1.0 mm (40 mils) for optimal linear operation.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with a minimum bend radius of 25.4 mm (1.0 in) to avoid damage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor axial position measurements on shafts smaller than 13 mm (0.5 in) diameter, be aware that the scale factor may change; reducing the probe-to-target gap can mitigate this effect.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330905-00-08-05-01-00 is built for long service life, but regular inspection ensures reliability:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePeriodically check the probe cable for cuts, abrasions, or kinks that could affect signal integrity.\u003c\/li\u003e\n\u003cli\u003eVerify that the mounting threads remain secure and free of corrosion.\u003c\/li\u003e\n\u003cli\u003eClean the probe tip with a soft cloth if contaminants accumulate; avoid harsh solvents that may damage the PPS tip.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWith proper care, this industrial automation module provides years of dependable operation, minimizing lifecycle costs and maximizing return on investment.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore purchasing, verify that the 330905-00-08-05-01-00 matches your system requirements. Confirm the thread size (M10x1), overall case length (80 mm), and total cable length (0.5 m) align with your installation. Ensure compatibility with your existing Bently Nevada 3300 XL monitoring system and extension cables.\u003c\/p\u003e\u003cp\u003eWhen you need authentic, factory-new components, trust PLC Source PRO as your reliable supplier. We offer a 12-month warranty and original factory packaging on every order.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482492039267,"sku":"330905-00-08-05-01-00","price":291.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330905-00-16-10-02-05_e7556afd-b54a-48f0-8372-d36d3b64fff9.jpg?v=1786811157","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330905-00-08-05-01-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}