{"product_id":"bently-nevada-330904-08-10-50-11-00-industrial-automation-module","title":"Bently Nevada 330904-08-10-50-11-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330904-08-10-50-11-00\u003c\/strong\u003e is a 3300 NSv proximity probe designed for reliable vibration and position monitoring in industrial rotating machinery. This model features an M8x1 threaded case, 80 mm unthreaded length, 100 mm overall case length, and a 5.0-meter total length with a miniature coaxial ClickLoc connector and FluidLoc cable. It is built to withstand harsh process environments, offering enhanced chemical resistance compared to earlier 3300 RAM probes.\u003c\/p\u003e\u003cp\u003eAs part of the 3300 NSv series, the 330904-08-10-50-11-00 delivers precise gap measurements with a linear range of 1.5 mm (60 mils) and an incremental scale factor of 7.87 V\/mm (200 mV\/mil). Its side-view characteristics are superior to those of the 3000-series 190 probe when gapping at the same distance, making it an excellent choice for compressor and turbine monitoring.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe following specifications are directly from the product datasheet for the 330904-08-10-50-11-00:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e 5.3 ± 0.7 ohms (for 5.0 m probe length)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 1.5 mm (60 mils), starting at approximately 0.25 mm (10 mils) from target\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Gap Setting:\u003c\/strong\u003e 1.0 mm (40 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) +12.5%\/-20%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from Best Fit Straight Line (DSL):\u003c\/strong\u003e Less than ±0.06 mm (±2.3 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 0 to 10 kHz: +0, -3 dB typical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTarget Size (flat target):\u003c\/strong\u003e Minimum 8.9 mm diameter; recommended minimum 13 mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 75 Ω coaxial, FEP insulated, available in 0.5, 1, 5, or 7 meters\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Torque:\u003c\/strong\u003e 0.56 N•m (5 in•lb); recommended finger tight\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating\/Storage Temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Torque (M8x1):\u003c\/strong\u003e Maximum 7.3 N•m (65 in•lb), recommended 5.1 N•m (45 in•lb)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe 330904-08-10-50-11-00 excels in process compressor applications where chemical resistance is critical. Its compatibility with previous 3300 RAM probes allows straightforward upgrades in existing Bently Nevada monitoring systems.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcess Compressors:\u003c\/strong\u003e Enhanced chemical resistance ensures reliable operation in aggressive media.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTurbomachinery:\u003c\/strong\u003e Accurate shaft vibration and axial position monitoring for turbines.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePumps and Motors:\u003c\/strong\u003e Detect shaft displacement and vibration to prevent catastrophic failure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation is key to achieving accurate measurements. Follow these guidelines:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque:\u003c\/strong\u003e Tighten the probe case to the recommended 5.1 N•m (45 in•lb) for M8x1 threads. Do not exceed the maximum rated torque of 7.3 N•m (65 in•lb).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGap Setting:\u003c\/strong\u003e Set the initial gap to 1.0 mm (40 mils) to operate within the linear range.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eField Wiring:\u003c\/strong\u003e Use three-conductor shielded triad cable with 0.2 to 1.5 mm² (16 to 24 AWG) conductors. Maximum length between the Proximitor sensor and monitor is 305 meters (1,000 feet).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBend Radius:\u003c\/strong\u003e Maintain a minimum bend radius of 25.4 mm (1.0 in) for the probe cable to avoid damage.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe 330904-08-10-50-11-00 is designed for long service life, but regular inspection ensures optimal performance:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInspect Probe Tip:\u003c\/strong\u003e Check for wear or contamination on the PPS tip that could affect readings.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCheck Cable Integrity:\u003c\/strong\u003e Look for cuts or abrasions, especially near the connector and bend points.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVerify Torque:\u003c\/strong\u003e Periodically confirm that the probe case is still tightened to the recommended torque.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEnvironmental Considerations:\u003c\/strong\u003e The probe operates from -52°C to +177°C, making it suitable for extreme conditions.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen ordering the 330904-08-10-50-11-00, verify the following options to ensure it matches your system: unthreaded length (-08 = 80 mm), overall case length (-10 = 100 mm), total length (50 = 5.0 meters), connector type (11 = miniature coaxial ClickLoc with FluidLoc cable), and agency approval (00 = not required).\u003c\/p\u003e\u003cp\u003ePLC Source PRO supplies this Bently Nevada 330904-08-10-50-11-00 as a new, original factory-packed unit with a 12-month warranty. Ensure compatibility with your existing 3300 XL NSv Proximitor sensor and monitor before purchase.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482337472611,"sku":"330904-08-10-50-11-00","price":260.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330904_202_8e772d79-8595-46e3-a29e-32d8d2f210ec.jpg?v=1786803720","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330904-08-10-50-11-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}