{"product_id":"bently-nevada-330904-00-15-05-11-00-industrial-automation-module","title":"Bently Nevada 330904-00-15-05-11-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330904-00-15-05-11-00\u003c\/strong\u003e is a 3300 NSv proximity probe designed for reliable vibration and position monitoring in critical rotating machinery. This industrial automation module features an M8X1 threaded case with stainless steel armor, a 150 mm overall case length, and a 0.5 meter (20 inch) FluidLoc cable with a miniature coaxial ClickLoc connector. It offers enhanced chemical resistance over previous 3300 RAM probes, making it suitable for process compressor applications. The probe is supplied new and in original factory packing, backed by a 12-month warranty.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eKey performance parameters for the \u003cstrong\u003e330904-00-15-05-11-00\u003c\/strong\u003e include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e 4.0 ± 0.5 ohms (0.5 m probe)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 1.5 mm (60 mils), starting at approximately 0.25 mm (10 mils) from target\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Gap Setting:\u003c\/strong\u003e 1.0 mm (40 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) +12.5%\/-20%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from Best Fit Straight Line (DSL):\u003c\/strong\u003e Less than ±0.06 mm (±2.3 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 0 to 10 kHz: +0, -3 dB typical (with up to 305 m of field wiring)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating\/Storage Temperature:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 75 Ω coaxial, FEP insulated, total length 0.5 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Torque:\u003c\/strong\u003e 0.56 N•m (5 in•lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 in)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003e330904-00-15-05-11-00\u003c\/strong\u003e is engineered for use in turbomachinery, compressors, pumps, and other rotating equipment where precise shaft vibration and axial position monitoring are essential. Its enhanced chemical resistance makes it ideal for process compressor applications where exposure to aggressive media is common. The probe's superior side-view characteristics allow accurate gapping even in confined spaces.\u003c\/p\u003e\u003cp\u003eIn a typical replacement scenario, this probe directly replaces older 3300 RAM probes without mechanical or electrical modifications, minimizing downtime and upgrade costs.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation is critical for accurate measurements. Follow these guidelines:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMount the probe with the recommended torque: finger tight, maximum 0.56 N•m (5 in•lb).\u003c\/li\u003e\n\u003cli\u003eEnsure the probe tip is clean and free from debris before installation.\u003c\/li\u003e\n\u003cli\u003eSet the initial gap to 1.0 mm (40 mils) using a suitable shim or feeler gauge.\u003c\/li\u003e\n\u003cli\u003eRoute the cable with a minimum bend radius of 25.4 mm (1.0 in) to avoid damage.\u003c\/li\u003e\n\u003cli\u003eFor field wiring, use a three-conductor shielded triad cable with conductor sizes 0.2 to 1.5 mm² (16 to 24 AWG). Maximum cable length between the Proximitor and monitor is 305 meters (1,000 feet).\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eRoutine inspection of the probe and cable is recommended to ensure long-term reliability. Check for physical damage, cable wear, and connector integrity. The probe's stainless steel case and PPS tip offer excellent durability in harsh environments. Operating within the specified temperature range (-52°C to +177°C) ensures consistent performance. Regular calibration checks can help maintain measurement accuracy.\u003c\/p\u003e\u003ch2\u003eCompatibility \u0026amp; Integration\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003e330904-00-15-05-11-00\u003c\/strong\u003e is mechanically and electrically compatible with Bently Nevada's previous 3300 RAM proximity probe and extension cable systems. It works seamlessly with 3300 XL NSv Proximitor Sensors and standard Bently Nevada monitoring systems. The ClickLoc connector ensures a secure, reliable connection.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore ordering, verify your specific requirements: unthreaded length (00 mm), overall case length (150 mm), total cable length (0.5 m), connector type (ClickLoc with FluidLoc cable), and agency approval (not required). Ensure the probe thread (M8X1) matches your mounting configuration. For assistance, contact the experts at PLC Source PRO to confirm compatibility and availability.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482145976419,"sku":"330904-00-15-05-11-00","price":230.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330904_202_0960c41b-a7bf-456b-bbe9-749f357e2717.jpg?v=1786796862","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330904-00-15-05-11-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}