{"product_id":"bently-nevada-330903-00-05-05-02-00-industrial-automation-module","title":"Bently Nevada 330903-00-05-05-02-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330903-00-05-05-02-00 is an industrial automation module designed for precise proximity measurement in rotating machinery. This 3300 NSv probe features an M8X1 thread, a 0.5-meter cable, and a miniature coaxial ClickLoc connector. It is a direct replacement for the earlier 3300 RAM probe, offering improved chemical resistance for demanding process compressor applications.\u003c\/p\u003e\u003cp\u003eWith a linear range of 1.5 mm and an incremental scale factor of 7.87 V\/mm, the 330903-00-05-05-02-00 delivers reliable vibration and position data to protect critical assets.\u003c\/p\u003e\u003ch2\u003eKey Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Type:\u003c\/strong\u003e 3300 NSv Proximity Probe\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread Size:\u003c\/strong\u003e M8X1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUnthreaded Length:\u003c\/strong\u003e 0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOverall Case Length:\u003c\/strong\u003e 50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTotal Length:\u003c\/strong\u003e 0.5 meter (20 inches)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Miniature coaxial ClickLoc, standard cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e 4.0 ± 0.5 ohms (at 0.5 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLinear Range:\u003c\/strong\u003e 1.5 mm (60 mils)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIncremental Scale Factor (ISF):\u003c\/strong\u003e 7.87 V\/mm (200 mV\/mil) ±12.5%\/-20%\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDeviation from Straight Line (DSL):\u003c\/strong\u003e Less than ±0.06 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Response:\u003c\/strong\u003e 0 to 10 kHz (+0, -3 dB) with up to 305 m of field wiring\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -52°C to +177°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStorage Temperature:\u003c\/strong\u003e -52°C to +177°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 75 Ω coaxial, FEP insulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Torque:\u003c\/strong\u003e 0.56 N·m (5 in·lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 in)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eApplications\u003c\/h2\u003e\u003cp\u003eThe 330903-00-05-05-02-00 is ideal for radial and axial position monitoring in turbines, compressors, pumps, and other rotating equipment. Its enhanced chemical resistance makes it suitable for process compressor applications where exposure to aggressive media is common. The probe provides accurate gap measurements for machinery protection and condition monitoring systems.\u003c\/p\u003e\u003cp\u003eThanks to its superior side-view characteristics, this module delivers consistent readings even when the probe is gapped at the same distance as older models, simplifying retrofits.\u003c\/p\u003e\u003ch2\u003eInstallation and Setup\u003c\/h2\u003e\u003cp\u003eInstall the Bently Nevada 330903-00-05-05-02-00 by threading it into a properly prepared mounting hole. Use the recommended torque of 5.1 N·m (45 in·lb) for the probe case; do not exceed 7.3 N·m (65 in·lb). Finger-tighten the connector and avoid over-torquing. Ensure the cable bend radius does not exceed 25.4 mm to prevent damage.\u003c\/p\u003e\u003cp\u003eFor field wiring, use a three-conductor shielded triad cable with 0.2 to 1.5 mm² (16 to 24 AWG) conductors. The maximum cable length between the Proximitor Sensor and the monitor is 305 meters (1000 feet).\u003c\/p\u003e\u003ch2\u003eMaintenance and Reliability\u003c\/h2\u003e\u003cp\u003eRoutine inspection should focus on the probe tip and cable for signs of wear or chemical attack. The NSv design offers improved chemical resistance, reducing maintenance frequency in harsh environments. Verify the probe's DC resistance periodically to ensure it remains within tolerance (4.0 ± 0.5 ohms). If the resistance drifts, check cable integrity and connector tightness.\u003c\/p\u003e\u003cp\u003eOperating and storage temperature ranges of -52°C to +177°C allow use in extreme conditions, but prolonged exposure to temperatures near the upper limit may accelerate aging of the PPS tip.\u003c\/p\u003e\u003ch2\u003eSelection and Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen ordering this module, confirm the exact part number 330903-00-05-05-02-00 to match your application requirements. Verify thread size, overall length, and connector type. For assistance with compatibility or custom pressure testing, consult the manufacturer's guidelines.\u003c\/p\u003e\u003cp\u003ePLC Source PRO offers this Bently Nevada module as new, original factory-packed equipment with a 12-month warranty. Ensure your system is compatible before purchase.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44482118647907,"sku":"330903-00-05-05-02-00","price":221.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330903-4-2_b13eb452-e3ed-4cfc-809c-72ed981c2146.jpg?v=1786787731","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330903-00-05-05-02-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}