{"product_id":"bently-nevada-330730-040-01-cn-industrial-automation-module","title":"Bently Nevada 330730-040-01-CN Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eIn critical rotating machinery monitoring, signal integrity under extreme conditions is paramount. The Bently Nevada 330730-040-01-CN is a 3300 XL 11 mm Extension Cable designed to deliver reliable performance in demanding industrial environments. This 4.0-meter (13.1 feet) armored cable connects 3300 XL proximity probes to Proximitor sensors, maintaining accurate vibration and position measurements even in high-temperature, moisture-laden, or physically harsh settings. Part of the trusted Bently Nevada 3300 XL series, the 330730-040-01-CN ensures robust data transmission for predictive maintenance and process safety.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330730-040-01-CN meets stringent specifications to support precision monitoring. Below are its key parameters derived from factory data:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 4.0 meters (13.1 feet) – option code 040\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector and Cable Option:\u003c\/strong\u003e 01 Armored cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable Capacitance:\u003c\/strong\u003e 69.9 pF\/m (21.3 pF\/ft) typical\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable Material:\u003c\/strong\u003e 75 Ω triaxial, fluoroethylene propylene (FEP) insulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExtension Cable Armor:\u003c\/strong\u003e Flexible AISI 302 SST with FEP outer jacket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating and Storage Temperature:\u003c\/strong\u003e -51°C to +177°C (-60°F to +351°F) [Note: another source states -52°C to +177°C, use -51°C as primary? In data we have -51°C and -52°C; we'll use -51°C as per short description, but also mention -52°C? To avoid confusion, we'll stick to -51°C from the short description since it's listed first. However the full spec says -52°C in another table. We must not invent; we have both. The rule: use the value from the data exactly. The short description says -51°C; the other table says -52°C. Since the short description is the main provided data, we use -51°C. We'll note that the exact range is verified per documentation.]\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance (for 8.0 m cable, reference):\u003c\/strong\u003e Center conductor 2.0 ± 0.5 Ω; Coaxial conductor 0.6 ± 0.2 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAgency Approval:\u003c\/strong\u003e CN Country Specific\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese specifications ensure the 330730-040-01-CN maintains signal fidelity over its 4.0-meter length, with armored protection for rugged installations.\u003c\/p\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330730-040-01-CN excels in applications where consistent measurement is critical. In power generation turbines, the armored cable withstands high vibration and temperature swings, preventing signal degradation. In oil and gas compressor trains, its FEP insulation resists chemical exposure and moisture ingress. The CN country-specific approval means it meets local regulatory requirements for industrial safety. Whether used in steam turbine shaft vibration monitoring or centrifugal compressor thrust position sensing, this extension cable preserves the accuracy of the 3300 XL probe system.\u003c\/p\u003e\u003ch2\u003eInstallation and Setup\u003c\/h2\u003e\u003cp\u003eInstalling the Bently Nevada 330730-040-01-CN requires careful routing to avoid sharp bends and physical stress on the armored jacket. Ensure the cable length is adequate for the distance between probe and Proximitor sensor, with no splicing. The gold-plated brass ClickLoc connectors lock securely – listen for an audible click. For environments with turbine oil, use the provided silicone tape on the connection instead of connector protectors. Pre-drilled safety wire holes on the locknut allow mechanical retention. Route cable away from high-EMI sources and secure with appropriate clamps.\u003c\/p\u003e\u003ch2\u003eMaintenance and Reliability\u003c\/h2\u003e\u003cp\u003eThe 330730-040-01-CN is designed for long service life. Inspect the armored jacket periodically for cuts or corrosion – flexible AISI 302 SST resists most environments but check at bends. The FEP outer jacket remains stable from -51°C to +177°C, so thermal cycling is not a concern. Verify connector tightness during routine shutdowns. If damaged, replace the entire cable; field repair is not recommended. Regular maintenance ensures the extension cable continues to deliver reliable performance, reducing unplanned downtime.\u003c\/p\u003e\u003ch2\u003eSelection Guide\u003c\/h2\u003e\u003cp\u003eBefore purchasing the Bently Nevada 330730-040-01-CN, verify that your 3300 XL probe requires a 4.0-meter extension cable with armored construction. This part number is specific to the CN country code – ensure compatibility with your local agency requirements. For other lengths or non-armored options, refer to the 3300 XL series catalog. UBEST Automation (ubest101) stocks genuine Bently Nevada spare parts; when ordering, confirm the complete part number – 330730-040-01-CN – matches your system configuration.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44406184378467,"sku":"330730-040-01-CN","price":212.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330730-040-00-00_9f1a308b-d2b6-4d2c-a799-e636185b152c.jpg?v=1785128743","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330730-040-01-cn-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}