{"product_id":"bently-nevada-330709-000-230-90-11-00-3300-xl-11-mm-proximity-probes","title":"Bently Nevada 330709-000-230-90-11-00 3300 XL 11 mm Proximity Probes","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eWhen machine vibration monitoring systems require precise and durable sensing, the Bently Nevada 330709-000-230-90-11-00 3300 XL 11 mm Proximity Probes deliver consistent performance. This probe features a M16x1.5 thread, 0 mm unthreaded length, 230 mm overall case length, and a 9.0 meter cable with a miniature coaxial ClickLoc connector and FluidLoc cable. Designed for harsh industrial environments, this probe operates reliably across a wide temperature range from -52°C to +177°C.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe following specifications are extracted from the product datasheet for the Bently Nevada 330709-000-230-90-11-00:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Resistance:\u003c\/strong\u003e 8.5 ± 1.1 ohms (9.0 m probe length)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 75 Ω triaxial, FEP insulated; available in 1, 5, or 9 meters (this unit is 9 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e M16x1.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Thread Engagement:\u003c\/strong\u003e 24 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Probe Case Torque:\u003c\/strong\u003e 21.1 N·m (187 in·lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e -52°C to +177°C operating\/storage\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Classification:\u003c\/strong\u003e T1 to T5 per EPL Ga\/Gc and Dc schedules\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFor EPL Ga and Gc, the temperature classifications range from T1 (ambient -55°C to +232°C) down to T5 (-55°C to +40°C). For EPL Dc, the T280°C@Ta schedule supports up to 232°C ambient.\u003c\/p\u003e\u003ch2\u003eApplication Scenarios\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330709-000-230-90-11-00 is ideal for vibration monitoring on rotating machinery such as turbines, compressors, and pumps. In a typical installation, the probe measures shaft displacement relative to the bearing housing. The 9.0 meter cable length allows flexible placement of the signal conditioning electronics. The FluidLoc cable resists moisture and chemicals, making it suitable for process industries. One common failure mode is cabling damage due to excessive bending; the minimum bend radius of 25.4 mm helps prevent this.\u003c\/p\u003e\u003ch2\u003eInstallation and Setup Guidance\u003c\/h2\u003e\u003cp\u003eWhen installing the 330709-000-230-90-11-00, follow these guidelines:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse the recommended probe case torque of 21.1 N·m (187 in·lb) to avoid damaging the thread or housing.\u003c\/li\u003e\n\u003cli\u003eEnsure the connector-to-connector torque does not exceed 0.565 N·m (5 in·lb); finger tight is sufficient.\u003c\/li\u003e\n\u003cli\u003eRespect the minimum bend radius of 25.4 mm for the cable to prevent internal wire breakage.\u003c\/li\u003e\n\u003cli\u003eFor best cross-talk immunity, the target flat surface should be at least 30.5 mm in diameter, and the shaft diameter at least 152 mm.\u003c\/li\u003e\n\u003cli\u003eOperate above -34°C to avoid premature pressure seal failure.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaintenance and Reliability\u003c\/h2\u003e\u003cp\u003eRoutine inspection of the Bently Nevada 330709-000-230-90-11-00 should focus on cable integrity and connector tightness. The probe case is stainless steel and resists corrosion; the PPS tip withstands chemical exposure. The temperature schedule ensures safe operation in hazardous areas (EPL Ga, Gc, Dc). To maximize service life, avoid temperatures below -34°C during operation and store within -52°C to +177°C.\u003c\/p\u003e\u003ch2\u003eTroubleshooting Common Issues\u003c\/h2\u003e\u003cp\u003eCommon problems with proximity probes include false readings from cross-talk, cable damage, and thermal drift. For the Bently Nevada 330709-000-230-90-11-00, verify the probe resistance (8.5 ± 1.1 ohms) to check cable integrity. If readings are noisy, inspect the connector and cable for bends tighter than 25.4 mm. Ensure the target size meets minimum recommendations to avoid cross-talk. If temperature extremes affect performance, review the applicable temperature classification for your environment.\u003c\/p\u003e\u003ch2\u003eSelection Guide and Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen selecting a replacement probe, confirm the thread size (M16x1.5), overall length (230 mm case, 9.0 m cable), and connector type (miniature coaxial ClickLoc). The Bently Nevada 330709-000-230-90-11-00 includes a connector protector and FluidLoc cable. For pricing and availability, visit ubest101 shop for genuine Bently Nevada parts.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44404396359779,"sku":"330709-000-230-90-11-00","price":213.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330709_20_281_29_0752d13d-8622-4385-b17a-f2e1d7740442.jpg?v=1785136652","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330709-000-230-90-11-00-3300-xl-11-mm-proximity-probes","provider":"PLC Source PRO","version":"1.0","type":"link"}