{"product_id":"bently-nevada-330709-000-230-90-01-00-3300-xl-11-mm-proximity-probes","title":"Bently Nevada 330709-000-230-90-01-00 3300 XL 11 mm Proximity Probes","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330709-000-230-90-01-00 3300 XL 11 mm Proximity Probes deliver precise shaft vibration and position measurements in rotating machinery. Built for harsh environments, this probe resists common failure modes such as temperature-induced pressure seal damage and connector loosening. The 330709-000-230-90-01-00 design includes a rugged M16x1.5 thread, a 9.0-meter coaxial cable with ClickLoc connector, and a polyphenylene sulfide (PPS) tip for reliable performance in demanding applications.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eKey parameters of the Bently Nevada 330709-000-230-90-01-00 ensure consistent operation:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Resistance (RPROBE)\u003c\/td\u003e\n\u003ctd\u003e8.5 ± 1.1 ohms (center to outer conductor)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Temperature Range (Operating\/Storage)\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCable Type\u003c\/td\u003e\n\u003ctd\u003e75 Ω triaxial, FEP insulated, 9.0 m length\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Probe Case Torque (M16x1.5)\u003c\/td\u003e\n\u003ctd\u003e21.1 N•m (187 in•lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Torque (Max)\u003c\/td\u003e\n\u003ctd\u003e0.565 N•m (5 in•lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Target Flat Surface Diameter\u003c\/td\u003e\n\u003ctd\u003e30.5 mm (1.2 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Shaft Diameter\u003c\/td\u003e\n\u003ctd\u003e152 mm (6.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eFailure Mode Analysis \u0026amp; Robust Design\u003c\/h2\u003e\u003cp\u003eThe 330709-000-230-90-01-00 addresses common failure causes in proximity probes. Its PPS tip resists chemical attack and high temperatures, while the stainless steel case withstands corrosion. The probe’s temperature schedule covers classifications T1 to T5, with ambient ranges from -55°C up to +232°C, preventing premature seal failure. The recommended torque values (21.1 N•m for the case, finger-tight for the connector) help avoid thread damage or loose connections that can cause false readings. Cross-talk is minimized by adhering to the specified minimum target and shaft diameters.\u003c\/p\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThis probe is ideal for monitoring critical rotating equipment such as steam turbines, compressors, and pumps. In a petrochemical plant, the 330709-000-230-90-01-00 provides accurate shaft displacement data, enabling early detection of bearing wear or imbalance. For power generation, its wide temperature range allows installation near hot turbine casings without signal degradation. The 9.0-meter cable length suits large machinery where the monitor rack is positioned remotely.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eMount the Bently Nevada 330709-000-230-90-01-00 with the recommended torque to avoid thread stress. Use a torque wrench set to 21.1 N•m for the M16x1.5 case. For the miniature coaxial ClickLoc connector, tighten by hand only; overtightening (max 0.565 N•m) can damage the contact. Ensure the probe tip is perpendicular to the target surface and that the minimum flat surface diameter of 30.5 mm is met. Observe the minimum bend radius of 25.4 mm (1.0 in) for the cable to prevent internal breakage.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eInspect the probe cable and connector for wear or moisture ingress annually. The PPS tip requires no routine cleaning but should be protected from abrasive particles. The probe’s robust construction – 304 SST case and FEP-insulated cable – offers long service life in temperatures from -52°C to +177°C. Note: Exposing the probe to temperatures below -34°C may risk the pressure seal, so avoid prolonged sub-30°F storage without proper conditioning.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen ordering the 330709-000-230-90-01-00, confirm compatibility with your monitor system (e.g., 3300 XL series). The 9.0-meter cable length is fixed; for different lengths, consider other part numbers in the 330709 family. UBEST Automation stocks genuine Bently Nevada probes with full traceability. Contact us at ubest101 for volume pricing or to verify system integration requirements.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44404394328163,"sku":"330709-000-230-90-01-00","price":290.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330709_20_281_29_2d4c3751-6a98-4446-a55b-88c0b12fc1ca.jpg?v=1785136466","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330709-000-230-90-01-00-3300-xl-11-mm-proximity-probes","provider":"PLC Source PRO","version":"1.0","type":"link"}