{"product_id":"bently-nevada-330709-000-230-50-02-00-3300-xl-11-mm-proximity-probe","title":"Bently Nevada 330709-000-230-50-02-00 3300 XL 11 mm Proximity Probe","description":"\u003ch2\u003eProduct Introduction\u003c\/h2\u003e\u003cp\u003eWhen vibration monitoring in rotating machinery must deliver absolute reliability, the Bently Nevada 330709-000-230-50-02-00 3300 XL 11 mm Proximity Probe provides the precision you need. This probe is designed for use with five-meter Proximitor sensors, featuring a miniature coaxial ClickLoc connector and standard cable. The 330709-000-230-50-02-00 is part of the proven 3300 XL series, engineered for continuous duty in harsh industrial environments.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330709-000-230-50-02-00 offers a robust set of parameters derived from its design:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Thread:\u003c\/strong\u003e M16x1.5, maximum thread engagement 24 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe dc Resistance (RPROBE):\u003c\/strong\u003e 7.2 ± 0.8 ohms at 5.0 m length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTemperature Range:\u003c\/strong\u003e Operating and storage -52°C to +177°C (-62°F to +351°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-talk Limitation:\u003c\/strong\u003e Recommended minimum target flat surface diameter 30.5 mm; shaft diameter 152 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Torque (M16x1.5):\u003c\/strong\u003e Recommended 21.1 N·m (187 in·lb), maximum rated 63.3 N·m (560 in·lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector-to-connector torque:\u003c\/strong\u003e Recommended finger tight, maximum 0.565 N·m (5 in·lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Bend Radius:\u003c\/strong\u003e 25.4 mm (1.0 in) with or without stainless steel armor\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese specifications ensure the 330709-000-230-50-02-00 performs reliably under mechanical stress and temperature extremes.\u003c\/p\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eIn critical rotating equipment such as turbines, compressors, and pumps, the Bently Nevada 330709-000-230-50-02-00 delivers accurate vibration and position sensing. Its temperature schedule supports ambient conditions from -55°C to +232°C depending on temperature classification (T1–T5), making it suitable for gas and dust hazardous areas (EPL Ga, Gc, Dc). For example, in a steam turbine installation, the probe's 5.0 m cable length matches standard Proximitor sensor distances, while the high-temperature rating handles near-bearing environments.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation of the Bently Nevada 330709-000-230-50-02-00 ensures optimal performance. Tighten the M16x1.5 probe case to the recommended torque of 21.1 N·m (187 in·lb) — never exceed 63.3 N·m. Use only finger tight for the connector-to-connector joint to avoid damage. Observe a minimum bend radius of 25.4 mm for the cable. For cross-talk avoidance, maintain a minimum target flat surface diameter of 30.5 mm and a shaft diameter of at least 152 mm. The probe cable is 75 Ω triaxial with fluorocarbon (FEP) insulation.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eRoutine inspection of the Bently Nevada 330709-000-230-50-02-00 should focus on cable integrity and connector cleanliness. The PPS tip and stainless steel case resist corrosion and wear. Avoid exposing the probe to temperatures below -34°C (-30°F) for extended periods, as this may cause pressure seal failure. The temperature schedule provides clear operational limits for various ambient conditions. Regular calibration checks against known gap voltages ensure continued accuracy.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen selecting the Bently Nevada 330709-000-230-50-02-00, verify your system's cable length requirement — this probe is designed for 5.0 m Proximitor sensors only. The unthreaded length is 0 mm, overall case length 230 mm, and total length 5.0 m (16.4 ft). Ensure your connector type matches the miniature coaxial ClickLoc. For additional support or to confirm compatibility with your existing Bently Nevada system, contact UBEST Automation (available at ubest101). We stock genuine Bently Nevada probes to minimize downtime.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44404390330467,"sku":"330709-000-230-50-02-00","price":288.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330709_20_281_29_71af1e68-670e-47a9-ade2-f4d43167ec56.jpg?v=1785136199","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330709-000-230-50-02-00-3300-xl-11-mm-proximity-probe","provider":"PLC Source PRO","version":"1.0","type":"link"}