{"product_id":"bently-nevada-330709-000-040-50-01-00-3300-xl-11-mm-proximity-probes-ubest-automation","title":"Bently Nevada 330709-000-040-50-01-00 3300 XL 11 mm Proximity Probes-UBEST Automation","description":"\u003ch2\u003eProduct Introduction\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330709-000-040-50-01-00 is a 3300 XL 11 mm Proximity Probe designed for precise, non-contact vibration and position measurement in critical rotating machinery. This probe features an M16 x 1.5 thread, 0 mm unthreaded length, and 40 mm overall case length, with a total probe length of 5.0 meters (16.4 feet). It includes a miniature coaxial ClickLoc connector with connector protector and standard cable. As part of the trusted 3300 XL series, the Bently Nevada 330709-000-040-50-01-00 delivers reliable performance in harsh industrial environments.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications Breakdown\u003c\/h2\u003e\u003cp\u003eKey technical parameters for the Bently Nevada 330709-000-040-50-01-00 include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance:\u003c\/strong\u003e 7.2 ± 0.8 Ω from center conductor to outer conductor at 5.0 m length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 75 Ω triaxial, FEP insulated, available in 1, 5, or 9 m lengths (this unit is 5 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Torque (Recommended):\u003c\/strong\u003e 21.1 N·m (187 in·lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature Range:\u003c\/strong\u003e -52°C to +177°C (-62°F to +351°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Target Size (Flat Surface):\u003c\/strong\u003e 30.5 mm diameter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMinimum Shaft Diameter:\u003c\/strong\u003e 152 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThese specs ensure accurate readings and long-term stability in demanding conditions.\u003c\/p\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330709-000-040-50-01-00 is ideal for monitoring vibration and position in turbines, compressors, pumps, and motors. Its robust construction withstands high temperatures and harsh chemicals. For example, in a steam turbine application, the probe’s -52°C to +177°C range covers both cold starts and full-load operation. The 5.0 m cable length matches the five-meter Proximitor Sensor for optimized system performance.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eWhen installing the Bently Nevada 330709-000-040-50-01-00, ensure correct torque: Apply 21.1 N·m for the M16x1.5 probe case. The connector-to-connector torque should be finger tight, maximum 0.565 N·m (5 in·lb). Maintain a minimum bend radius of 25.4 mm (1.0 in) on the cable to prevent damage. The maximum thread engagement length is 24 mm. Use the provided miniature ClickLoc connector for reliable signal transmission.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eTo maximize the lifespan of the Bently Nevada 330709-000-040-50-01-00, avoid exposing the probe to temperatures below -34°C (30°F) as this may cause premature pressure seal failure. Regularly inspect the cable and connector for wear. The PPS tip and stainless steel case resist corrosion and mechanical stress, reducing downtime. Choosing the Bently Nevada 330709-000-040-50-01-00 means investing in a proven solution that lowers total cost of ownership through fewer replacements and accurate monitoring.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore purchasing, verify that your Proximitor sensor is rated for the 5.0 m cable length. The Bently Nevada 330709-000-040-50-01-00 is designed exclusively for five-meter Proximitor Sensors. Ensure your mounting thread is M16x1.5. For compatible accessories and technical support, contact UBEST Automation. We stock genuine Bently Nevada probes to keep your operations running smoothly.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44404334198883,"sku":"330709-000-040-50-01-00","price":269.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330709_20_281_29_c0da557a-922f-43bc-a2b9-9bbee6318476.jpg?v=1785132526","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330709-000-040-50-01-00-3300-xl-11-mm-proximity-probes-ubest-automation","provider":"PLC Source PRO","version":"1.0","type":"link"}