{"product_id":"bently-nevada-330708-00-24-10-11-05-3300-xl-11-mm-proximity-probes","title":"Bently Nevada 330708-00-24-10-11-05 3300 XL 11 mm Proximity Probes","description":"\u003ch2\u003eProduct Introduction\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330708-00-24-10-11-05 is a 3300 XL 11 mm proximity probe designed for reliable, non-contact displacement measurement in critical rotating machinery. As part of the proven 3300 XL series, this probe offers exceptional stability and accuracy for vibration and position monitoring. Whether upgrading an existing system or replacing older probes, the 330708-00-24-10-11-05 delivers the performance required to protect your assets and reduce unplanned downtime.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThis probe features a robust set of specifications tailored for harsh industrial environments:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS) for high chemical and temperature resistance\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel (SST) for corrosion resistance and durability\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 75 Ω triaxial, fluoroethylene propylene (FEP) insulated, 1.0 metre total length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating and Storage Temperature:\u003c\/strong\u003e -51°C to +177°C (-60°F to +351°F) – covers extreme conditions\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance (1.0m):\u003c\/strong\u003e 5.9 ± 0.5 ohms from center to outer conductor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 5\/8-18 UNF with maximum thread engagement of 0.938 in (23.8 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque Specifications:\u003c\/strong\u003e Recommended 15.2 N•m (133 in•lb), maximum 45.2 N•m (400 in•lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePressure Seal:\u003c\/strong\u003e Viton O-ring designed for differential pressure between tip and case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Miniature coaxial ClickLoc with connector protector and FluidLoc cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation is key to achieving optimal performance from the 330708-00-24-10-11-05. The probe uses a 5\/8-18 UNF thread; ensure the mounting hole is clean and properly threaded. Apply the recommended torque of 15.2 N•m (133 in•lb) to avoid damaging the case or seal. For the ClickLoc connector, finger-tighten only—maximum torque is 0.565 N•m (5 in•lb). The minimum bend radius for the cable is 25.4 mm (1.0 in), so route cables carefully to avoid kinking. When installing, verify that the probe tip pressure seal is not compromised by excessive heat or cold below -34°C, which may cause premature failure.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eBently Nevada 330708-00-24-10-11-05 proximity probes are built for long-term reliability, but periodic inspection is recommended. Check the connector for signs of wear or corrosion. Ensure the cable is not subject to repeated flexing beyond the minimum bend radius. The probe operates reliably across a wide temperature range, but avoid exposing it to temperatures below -34°C (30°F) for extended periods, as this can degrade the Viton seal. The AISI 304 stainless steel case and PPS tip resist most industrial contaminants, making the probe suitable for high-moisture or chemical environments. Regular calibration checks (per manufacturer guidelines) ensure continued accuracy.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore purchasing the 330708-00-24-10-11-05, verify the following: the required thread type (5\/8-18 UNF), overall cable length (1.0 metre in this model), and agency approval option (05 – Multiple Approvals). This probe does not include armor; if additional cable protection is needed, consider an armored variant. For applications requiring different lengths or thread options, consult the full 3300 XL series. UBEST Automation offers this genuine Bently Nevada probe with full traceability. Contact us for volume pricing or expedited shipping options.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44404273545315,"sku":"330708-00-24-10-11-05","price":258.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330708_20_2810_29_9609194f-d30d-4168-8bff-c103f44eb042.jpg?v=1785126395","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330708-00-24-10-11-05-3300-xl-11-mm-proximity-probes","provider":"PLC Source PRO","version":"1.0","type":"link"}