{"product_id":"bently-nevada-330708-00-10-90-01-05-3300-xl-11-mm-proximity-probes","title":"Bently Nevada 330708-00-10-90-01-05 3300 XL 11 mm Proximity Probes","description":"\u003ch2\u003eProduct Introduction\u003c\/h2\u003e\u003cp\u003eWhen pressure seal failures or cable degradation threaten uptime in rotating machinery monitoring, the \u003cstrong\u003eBently Nevada 330708-00-10-90-01-05\u003c\/strong\u003e 3300 XL 11 mm Proximity Probe delivers robust performance. Designed for high-temperature environments and harsh industrial conditions, this probe withstands thermal cycling and mechanical stress. Its PPS tip and AISI 304 stainless steel case resist corrosion and wear, making it ideal for long-term vibration measurement.\u003c\/p\u003e\u003ch2\u003eFailure Mode Analysis \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eCommon field failures in proximity probes include pressure seal leaks at low temperatures and cable fatigue from repeated bending. The \u003cstrong\u003eBently Nevada 330708-00-10-90-01-05\u003c\/strong\u003e mitigates these risks with a Viton O-ring seal and a triaxial FEP-insulated cable rated for -51°C to +177°C. The recommended 15.2 N·m (133 in·lb) case torque prevents overtightening damage, while the miniature coaxial ClickLoc connector ensures secure signal transmission. For installations below -34°C, allow gradual temperature stabilization to avoid premature seal failure.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Length:\u003c\/strong\u003e 9.0 m (29.5 ft) total length\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Resistance (RPROBE):\u003c\/strong\u003e 8.5 ± 1.1 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCase Thread:\u003c\/strong\u003e 5\/8-18 UNF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Thread Engagement:\u003c\/strong\u003e 0.938 in (23.8 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecommended Case Torque:\u003c\/strong\u003e 15.2 N·m (133 in·lb)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e -51°C to +177°C (-60°F to +351°F)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 75 Ω triaxial, FEP insulated\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e Miniature coaxial ClickLoc with protector\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShipping Weight:\u003c\/strong\u003e 0.17 kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eIn critical turbine and compressor monitoring, the \u003cstrong\u003eBently Nevada 330708-00-10-90-01-05\u003c\/strong\u003e delivers precise shaft displacement measurements. Its 11 mm sensing face and 5\/8-18 thread allow direct replacement in standard proximity probe holders. For paper mill roller bearings or refinery pump vibration, the PPS tip resists chemical attack. The high-temperature rating suits gas turbine exhaust frame monitoring where ambient heat exceeds 150°C.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eUse a calibrated torque wrench to tighten the probe case to 15.2 N·m (133 in·lb). Never exceed 45.2 N·m (400 in·lb) maximum. Ensure the thread engagement does not exceed 0.938 in (23.8 mm) to avoid case distortion. For the miniature coaxial ClickLoc connector, tighten finger-tight; maximum torque is 0.565 N·m (5 in·lb). Maintain a minimum bend radius of 25.4 mm (1.0 in) on the cable to prevent insulation damage.\u003c\/p\u003e\u003ch2\u003eTroubleshooting \u0026amp; Common Issues\u003c\/h2\u003e\u003cp\u003eIf output signals drift, verify connector torque and cable integrity. A sudden resistance change (\u0026gt;1.1 Ω from nominal) indicates cable damage or moisture ingress. For pressure seal leaks, inspect the O-ring and allow probe to reach ambient temperature before retightening. The probe is not pressure tested before shipment; contact UBEST Automation for custom pressure seal verification requirements.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore ordering, verify your system’s thread type and length requirements. The \u003cstrong\u003eBently Nevada 330708-00-10-90-01-05\u003c\/strong\u003e includes a 9.0 m cable and miniature ClickLoc connector. For extended cable runs, additional extension cables are available. Ensure your monitor accepts 75 Ω triaxial input. For pricing and lead time, visit ubest101 or contact our sales team.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44404260601955,"sku":"330708-00-10-90-01-05","price":285.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330708_20_281_29_dc6f2399-101a-484f-a042-53c85765f11a.jpg?v=1785125299","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330708-00-10-90-01-05-3300-xl-11-mm-proximity-probes","provider":"PLC Source PRO","version":"1.0","type":"link"}