{"product_id":"bently-nevada-330708-00-10-10-02-05-3300-xl-11-mm-proximity-probe","title":"Bently Nevada 330708-00-10-10-02-05 3300 XL 11 mm Proximity Probe","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eWhen premature pressure seal failure threatens the accuracy of vibration measurements in rotating machinery, the Bently Nevada 330708-00-10-10-02-05 3300 XL 11 mm Proximity Probe provides a robust solution. This probe is engineered to maintain reliable performance even under extreme thermal stresses, addressing a common failure mode in industrial environments.\u003c\/p\u003e\u003cp\u003ePart of the trusted 3300 XL series, the Bently Nevada 330708-00-10-10-02-05 is a noncontact proximity probe designed for demanding applications where continuous monitoring of shaft vibration and position is critical. Its construction features a Polyphenylene sulfide (PPS) tip and AISI 304 stainless steel case, ensuring durability and resistance to harsh conditions.\u003c\/p\u003e\u003ch2\u003eInstallation and Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation of the Bently Nevada 330708-00-10-10-02-05 is essential to achieve accurate measurements. The probe uses a 5\/8-18 UNF thread and requires careful torque application to avoid damaging the pressure seal. Recommended installation torque is moderate, and the maximum rated torque must not be exceeded to maintain seal integrity. A finger-tight connector torque is sufficient for the miniature coaxial ClickLoc connector.\u003c\/p\u003e\u003cp\u003eWhen mounting, ensure the probe tip is clean and free of debris. The probe case threads should engage fully but not beyond the maximum engagement length. For installations involving M16x1.5 or M14x1.5 threads, refer to the specific engagement limits to prevent interference.\u003c\/p\u003e\u003ch2\u003eMaintenance and Reliability\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330708-00-10-10-02-05 is designed for long-term reliability in extreme conditions. Its operating and storage temperature range is wide, but exposing the probe to sustained low temperatures can degrade the pressure seal over time. To maximize service life, avoid operating below the lower temperature threshold for extended periods.\u003c\/p\u003e\u003cp\u003eRegular inspection of the probe cable and connector is recommended. The cable is a 75 Ω triaxial, fluoroethylene propylene (FEP) insulated design, available in standard lengths. Check for any signs of wear or damage at the connector interface, as this can affect signal quality.\u003c\/p\u003e\u003ch2\u003eTroubleshooting Common Issues\u003c\/h2\u003e\u003cp\u003eA frequent issue with proximity probes is seal failure due to temperature extremes. The Bently Nevada 330708-00-10-10-02-05 mitigates this with a Viton O-ring and robust sealing design. If measurements become erratic, first verify that the probe is not exposed to temperatures below -34°C, as this can cause intermittent problems. Also confirm that the probe tip is not physically damaged and that the cable is properly connected.\u003c\/p\u003e\u003cp\u003eAnother potential problem is incorrect probe gap. The 3300 XL series probes require a specific initial gap for proper linear range operation. Always follow the mounting instructions to set the gap correctly.\u003c\/p\u003e\u003ch2\u003eSelection Guide and Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen selecting the Bently Nevada 330708-00-10-10-02-05 for your application, verify the required probe cable length and connector type. This variant comes with a miniature coaxial ClickLoc connector and standard cable. It also carries multiple agency approvals, ensuring compliance with international standards.\u003c\/p\u003e\u003cp\u003eUBEST Automation offers genuine Bently Nevada parts with reliable availability. Contact us for detailed specifications or to confirm fitment with your vibration monitoring system.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44404254081123,"sku":"330708-00-10-10-02-05","price":298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330708_20_281_29_226413e6-e21a-4514-b6da-11a815c4edc1.jpg?v=1785124635","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330708-00-10-10-02-05-3300-xl-11-mm-proximity-probe","provider":"PLC Source PRO","version":"1.0","type":"link"}