{"product_id":"bently-nevada-330707-00-62-90-12-00-3300-xl-11-mm-proximity-probe","title":"Bently Nevada 330707-00-62-90-12-00 3300 XL 11 mm Proximity Probe","description":"\u003ch2\u003eProduct Introduction\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330707-00-62-90-12-00 3300 XL 11 mm Proximity Probe is a high-reliability sensor designed for precise shaft vibration and position measurement in rotating machinery. As part of the proven 3300 XL series, this probe delivers consistent performance for critical applications such as turbines, compressors, and pumps. The 330707-00-62-90-12-00 offers a direct replacement path for older probe models, simplifying upgrades while maintaining system integrity.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eBelow are the key specifications for the Bently Nevada 330707-00-62-90-12-00 3300 XL 11 mm Proximity Probe, sourced from original manufacturer data.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Probe Length\u003c\/td\u003e\n\u003ctd\u003e9.0 meters (29.5 feet)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe dc Resistance (RPROBE)\u003c\/td\u003e\n\u003ctd\u003e8.5 ± 1.1 ohms\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Thread\u003c\/td\u003e\n\u003ctd\u003e5\/8-18 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 304 stainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating \u0026amp; Storage Temperature\u003c\/td\u003e\n\u003ctd\u003e-52°C to +177°C (-62°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Probe Case Torque\u003c\/td\u003e\n\u003ctd\u003e15.2 N·m (133 in·lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Probe Case Torque\u003c\/td\u003e\n\u003ctd\u003e45.2 N·m (400 in·lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector-to-Connector Torque (Max)\u003c\/td\u003e\n\u003ctd\u003e0.565 N·m (5 in·lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Bend Radius\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Length of Thread Engagement (5\/8-18)\u003c\/td\u003e\n\u003ctd\u003e0.938 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable Type\u003c\/td\u003e\n\u003ctd\u003e75 Ω triaxial, FEP insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShipping Weight\u003c\/td\u003e\n\u003ctd\u003e0.17 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese parameters ensure the Bently Nevada 330707-00-62-90-12-00 meets stringent requirements for reliability and accuracy in harsh industrial environments.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation of the 330707-00-62-90-12-00 is critical for accurate readings. Follow these guidelines based on manufacturer recommendations:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eUse the recommended probe case torque of 15.2 N·m (133 in·lb) – never exceed 45.2 N·m (400 in·lb).\u003c\/li\u003e\n\u003cli\u003eFor connector-to-connector connections, apply finger-tight torque; maximum 0.565 N·m (5 in·lb).\u003c\/li\u003e\n\u003cli\u003eEnsure the probe cable does not bend tighter than 25.4 mm (1.0 in) radius to prevent damage.\u003c\/li\u003e\n\u003cli\u003eThread engagement for 5\/8-18 UNF should not exceed 0.938 inches.\u003c\/li\u003e\n\u003cli\u003eAvoid exposing the probe to temperatures below -34°C (-30°F) as this may cause premature pressure seal failure.\u003c\/li\u003e\n\u003cli\u003eThe probe is designed for sealing differential pressure between tip and case; contact the custom design department if pressure testing is required.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eWhen upgrading from older probe models, verify the mounting thread and clearance dimensions match your application. The 330707-00-62-90-12-00 with its 5\/8-18 UNF thread and 9.0 m cable length suits many retrofit scenarios.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330707-00-62-90-12-00 3300 XL 11 mm Proximity Probe offers robust performance in temperature extremes from -52°C to +177°C. The Viton O-ring pressure seal maintains integrity under normal conditions, but regular inspection is advised for applications with cyclic thermal stress or high vibration. The PPS probe tip withstands chemical exposure while the AISI 304 stainless steel case resists corrosion. Periodic checks of cable insulation and connector integrity will extend service life. The probe is not pressure tested before shipment; for critical pressure seals, request a custom test from the manufacturer.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen choosing the Bently Nevada 330707-00-62-90-12-00, verify the model number suffix matches your requirements. The '00' unthreaded length, '62' overall case length (6.2 in), '90' total length (9.0 m), '12' connector (miniature coaxial ClickLoc with FluidLoc cable), and '00' agency approval (not required) are predefined. For other configurations, consult the full 3300 XL series offering. UBEST Automation supplies genuine Bently Nevada probes with traceable origins. Contact us at ubest101 for technical support or to confirm compatibility with your existing system.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44404249624675,"sku":"330707-00-62-90-12-00","price":288.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330707_203_b6a091a3-b462-4cde-8868-60eaa4971c1a.jpg?v=1785124296","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330707-00-62-90-12-00-3300-xl-11-mm-proximity-probe","provider":"PLC Source PRO","version":"1.0","type":"link"}