{"product_id":"bently-nevada-330191-00-33-50-05-industrial-automation-module","title":"Bently Nevada 330191-00-33-50-05 Industrial Automation Module","description":"\u003ch2\u003eProduct Introduction\u003c\/h2\u003e\u003cp\u003eUpgrading your vibration monitoring system? The Bently Nevada 330191-00-33-50-05 Industrial Automation Module replaces older proximity probe designs with advanced durability. This 3300 XL 8 mm ETR Probe features patented TipLoc and CableLoc technologies for superior mechanical strength. Its 5.0-meter total length and 3\/8-24 UNF thread make it a direct fit for many existing installations.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications Breakdown\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330191-00-33-50-05 delivers reliable performance with the following key parameters derived from real product data:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply (nonincendive)\u003c\/td\u003e\n\u003ctd\u003e-17.5 Vdc to -26 Vdc @ 12 mA max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Sensitivity\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;2 mV change per volt change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Resistance\u003c\/td\u003e\n\u003ctd\u003e50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNominal Probe DC Resistance (5.0 m)\u003c\/td\u003e\n\u003ctd\u003e8.73 ± 0.70 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 303 or 304 stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStandard Cable\u003c\/td\u003e\n\u003ctd\u003e75Ω triaxial, FEP insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength (Probe Case to Lead)\u003c\/td\u003e\n\u003ctd\u003e330 N (75 lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Connector Torque\u003c\/td\u003e\n\u003ctd\u003e0.565 N·m (5 in·lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Size \/ Engagement\u003c\/td\u003e\n\u003ctd\u003e3\/8-24 UNF \/ 0.563 in max\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight per meter\u003c\/td\u003e\n\u003ctd\u003e323 g\/m (11.4 oz)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Range (T1 class)\u003c\/td\u003e\n\u003ctd\u003e-55°C to +232°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThese specifications ensure consistent measurement and long service life in demanding industrial environments.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eWhen installing the Bently Nevada 330191-00-33-50-05, follow these key steps for optimal performance. Use the proper 3\/8-24 UNF thread engagement (maximum 0.563 inch) and tighten the connector to 0.565 N·m. The probe requires power from a nonincendive circuit per drawing 140979; operation outside -17.5 Vdc to -26 Vdc may reduce linear range. For systems with barriers, voltage must be -23 Vdc to -26 Vdc. Avoid operating at more positive than -23.5 Vdc to maintain full linear range.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330191-00-33-50-05 is built for extended uptime. Its patented TipLoc and CableLoc designs resist vibration and pull forces up to 330 N. The optional FluidLoc cable prevents oil leakage through the cable interior, a common failure point in older probes. Regular inspection of connector torque and cable integrity is recommended semiannually. The Viton® O-ring seals differential pressure but probes are not pressure tested prior to shipment—verify in application if pressure sealing is critical.\u003c\/p\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThis Bently Nevada 330191-00-33-50-05 module excels in rotating machinery monitoring for turbines, compressors, pumps, and motors. Its 8 mm diameter and thicker PPS encapsulation provide robustness against physical abuse, making it ideal for high-vibration environments. Upgrade your legacy systems with this probe to reduce spurious readings and extend calibration intervals.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44426616995939,"sku":"330191-00-33-50-05","price":241.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330191_202-10_5e29c3d1-dd4d-4870-bf20-f6f573f3dea9.jpg?v=1785450256","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330191-00-33-50-05-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}