{"product_id":"bently-nevada-330173-04-08-10-02-00-industrial-automation-module","title":"Bently Nevada 330173-04-08-10-02-00 Key Features \u0026 Applications","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330173-04-08-10-02-00\u003c\/strong\u003e is a 3300 5mm Probe with M8 x 1 thread and no armor. This industrial automation module acts as a direct replacement option for 3300-series proximity monitoring systems. The unit is made in the U.S.A. and is configured with a 40 mm unthreaded length, 80 mm overall case length, 1.0 metre total cable length, and a miniature coaxial ClickLoc connector with standard cable.\u003c\/p\u003e\u003cp\u003eThe probe tip is made of polyphenylene sulfide (PPS), and the probe case is made of AISI 304 stainless steel. Agency approval option 00 means no agency approval is required. The complete probe weighs 0.323 kg.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe values below apply to a proximity transducer system operating between +18°C and +27°C with a -24 Vdc power supply, a 10 kW load, an AISI 4140 steel target, and a probe gapped at 1.27 mm (50 mils).\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Requirement\u003c\/td\u003e\n\u003ctd\u003e-17.5 Vdc to -26 Vdc at 12 mA maximum consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Sensitivity\u003c\/td\u003e\n\u003ctd\u003eLess than 2 mV output change per volt input change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe DC Resistance (1.0 m)\u003c\/td\u003e\n\u003ctd\u003e7.59 Ω ± 0.50\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 303 or 304 stainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable\u003c\/td\u003e\n\u003ctd\u003e75 Ω triaxial, FEP insulated; available lengths 0.5, 1, 2, 5, or 9 m\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength\u003c\/td\u003e\n\u003ctd\u003e222 N (50 lbf) probe case to probe lead; 222 N (50 lbf) probe lead to extension cable connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Material\u003c\/td\u003e\n\u003ctd\u003eGold-plated brass or gold-plated beryllium copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Torque\u003c\/td\u003e\n\u003ctd\u003e5.1 N·m recommended; 7.3 N·m maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector-to-Connector Torque\u003c\/td\u003e\n\u003ctd\u003e0.565 N·m maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Cable Bend Radius\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-35°C to +177°C\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Thread\u003c\/td\u003e\n\u003ctd\u003eM8 x 1; maximum engagement 12 mm\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.323 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eInstallation \u0026amp; Mounting Guidance\u003c\/h2\u003e\u003cp\u003eUse the M8 x 1 thread with a maximum engagement length of 12 mm. Keep the probe case torque between the recommended 5.1 N·m and the maximum 7.3 N·m. Tighten the connector-to-connector joint to a maximum of 0.565 N·m.\u003c\/p\u003e\u003cp\u003eMaintain a minimum cable bend radius of 25.4 mm (1.0 in). Do not expose the probe below -34°C, because cold exposure can cause premature failure of the pressure seal. The reference gap for normal operation is 1.27 mm (50 mils) against an AISI 4140 steel target.\u003c\/p\u003e\u003ch2\u003eReliability \u0026amp; Environmental Performance\u003c\/h2\u003e\u003cp\u003eThe probe temperature range is -35°C to +177°C. In 60 Hz magnetic fields up to 300 Gauss (5 meter system), the probe output ranges from 0.0004 to 0.0045 mil pp\/gauss depending on gap. This low magnetic-field response helps protect measurement stability in industrial environments.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eVerify that your application needs a 3300 5mm Probe with M8 x 1 thread and no armor. Confirm that total length option 10 equals 1.0 metre and connector option 02 uses a miniature coaxial ClickLoc connector. PLC Source PRO stocks the \u003cstrong\u003eBently Nevada 330173-04-08-10-02-00\u003c\/strong\u003e and can confirm part details before you order.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44427425874019,"sku":"330173-04-08-10-02-00","price":298.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330173_6b4380e2-c19a-4df3-8524-3836fc77cacf.jpg?v=1785474702","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330173-04-08-10-02-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}