{"product_id":"bently-nevada-330173-00-06-10-02-00-industrial-automation-module","title":"Bently Nevada 330173-00-06-10-02-00 Product Overview \u0026 Specs","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 330173-00-06-10-02-00 is a 3300 5mm probe with an M8 x 1 thread, supplied without armor. This U.S.-made Industrial Automation Module measures shaft vibration and radial position in rotating machinery. Its configuration includes a 0 mm unthreaded length, a 60 mm overall case length, and a 1.0 metre (3.3 feet) total length. The miniature coaxial ClickLoc connector secures the standard cable while keeping the sensor compact.\u003c\/p\u003e\u003cp\u003eCable strain and connector wear are common failure points in proximity monitoring. The 330173-00-06-10-02-00 addresses both with 222 N (50 lbf) tensile strength at the probe case-to-lead and lead-to-extension connections, plus gold-plated connector contacts.\u003c\/p\u003e\u003ch2\u003eKey Technical Specifications\u003c\/h2\u003e\u003cp\u003eValues below apply to a system between +18°C and +27°C with a -24 Vdc supply, a 10 kW load, an AISI 4140 steel target, and a probe gapped at 1.27 mm (50 mils).\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e3300 5mm Probe, M8 x 1 thread, without armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConfiguration\u003c\/td\u003e\n\u003ctd\u003e0 mm unthreaded length, 60 mm case, 1.0 m cable, ClickLoc connector\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approval\u003c\/td\u003e\n\u003ctd\u003e00 = Not required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e-17.5 Vdc to -26 Vdc at 12 mA maximum consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Sensitivity\u003c\/td\u003e\n\u003ctd\u003eLess than 2 mV change in output voltage per volt change in input voltage\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Resistance\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe DC Resistance (1.0 m)\u003c\/td\u003e\n\u003ctd\u003e7.59 ± 0.50 Ω\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 303 or 304 stainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable\u003c\/td\u003e\n\u003ctd\u003e75 Ω triaxial, FEP insulated; 0.5, 1, 2, 5, or 9 m lengths\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength\u003c\/td\u003e\n\u003ctd\u003e222 N (50 lbf) case-to-lead; 222 N (50 lbf) lead-to-extension\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Material\u003c\/td\u003e\n\u003ctd\u003eGold-plated brass or gold-plated beryllium copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Torque\u003c\/td\u003e\n\u003ctd\u003e5.1 N·m recommended, 7.3 N·m maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector-to-Connector Torque\u003c\/td\u003e\n\u003ctd\u003e0.565 N·m (0.42 ft·lbf) maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Cable Bend Radius\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-35°C to +177°C (-31°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread Engagement (M8x1)\u003c\/td\u003e\n\u003ctd\u003e12 mm maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.323 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eAt 60 Hz and fields up to 300 Gauss (5 meter system), the probe output remains low: 0.0004 mil pp\/gauss at a 10 mil gap and 0.0045 at a 90 mil gap. This low magnetic-field response helps avoid false readings near motors and generators.\u003c\/p\u003e\u003ch2\u003eReal-World Applications\u003c\/h2\u003e\u003cp\u003eThe 330173-00-06-10-02-00 works in 3300-series radial vibration monitoring on turbine bearings, compressor shafts, and large pumps. The M8 x 1 thread enables precise installation into standard probe holes, while the 60 mm overall case length fits tight machinery clearances.\u003c\/p\u003e\u003cp\u003eFor axial position monitoring, the 1.0 m cable and miniature coaxial ClickLoc connector maintain a stable signal path. The PPS tip and stainless steel case give the mechanical strength required for continuous proximity sensing.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Mounting Guidance\u003c\/h2\u003e\u003cp\u003eProper installation prevents most field failures. Use the recommended probe case torque of 5.1 N·m (45 in·lb) and never exceed 7.3 N·m (65 in·lb). Over-tightening the M8 x 1 thread can stress the probe case.\u003c\/p\u003e\u003cp\u003eKeep the cable bend radius above 25.4 mm (1.0 in) and do not exceed 0.565 N·m (0.42 ft·lbf) at connector-to-connector joints. Thread engagement is limited to 12 mm maximum, so set the mounting depth to leave clearance.\u003c\/p\u003e\u003cp\u003eAfter mounting, set the probe gap to 1.27 mm (50 mils) under the specified system conditions to achieve the linear range published for the 330173-00-06-10-02-00.\u003c\/p\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eInspect the probe before each planned shutdown. Check the ClickLoc connector for looseness and verify the cable has not been bent below the 25.4 mm minimum radius.\u003c\/p\u003e\u003cp\u003eDo not expose the probe to temperatures below -34°C (-30°F); the data warns that this can cause premature failure of the pressure seal. The overall operating range is -35°C to +177°C (-31°F to +351°F), but long-term reliability improves within the normal industrial range.\u003c\/p\u003e\u003cp\u003eThe connector uses gold-plated brass or gold-plated beryllium copper, so a simple visual check for oxidation is enough to maintain stable signals.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eConfirm that each suffix in the part number matches your application. The 330173-00-06-10-02-00 specifies 00 = 0 mm unthreaded length, 06 = 60 mm overall case length, 10 = 1.0 m total length, 02 = miniature coaxial ClickLoc connector, and 00 = no agency approval.\u003c\/p\u003e\u003cp\u003eIf you need a different cable length or connector, select the matching 330173 series option. PLC Source PRO can help you verify compatibility with your 3300 monitor before ordering.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44427419385955,"sku":"330173-00-06-10-02-00","price":221.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330173_4a4b43ac-0065-4c73-9e2f-52ebb466f472.jpg?v=1785474380","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330173-00-06-10-02-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}