{"product_id":"bently-nevada-330172-05-63-05-02-05-industrial-automation-module","title":"Bently Nevada 330172-05-63-05-02-05 Product Overview \u0026 Specs","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eBently Nevada 330172-05-63-05-02-05\u003c\/strong\u003e is a 3300 series 5 mm proximity probe with a 1\/4-28 UNF thread, an armored lead, and a miniature coaxial ClickLoc connector. This exact configuration carries multiple agency approvals and is made in the USA.\u003c\/p\u003e\n\u003cp\u003eAs a sensing element for a 3300 XL eddy-current transducer system, this model measures shaft vibration or position without physical contact. Its 0.5 m total length and 6.3 in overall case length make it suitable for installations where the probe must reach the target through a limited space.\u003c\/p\u003e\n\u003ch2\u003eKey Specifications\u003c\/h2\u003e\n\u003cp\u003eAll values below are tied to the Bently Nevada 330172-05-63-05-02-05 configuration. The transducer system reference conditions are +18°C to +27°C, -24 Vdc supply, a 10 kW load, an AISI 4140 steel target, and a probe gap of 1.27 mm (50 mils).\u003c\/p\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eProduct Type\u003c\/td\u003e\n\u003ctd\u003e330172 3300 5 mm probe, 1\/4-28 UNF thread, with armor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eUnthreaded Length\u003c\/td\u003e\n\u003ctd\u003e0.5 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOverall Case Length\u003c\/td\u003e\n\u003ctd\u003e6.3 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTotal Length\u003c\/td\u003e\n\u003ctd\u003e0.5 m (1.6 ft)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003eMiniature coaxial ClickLoc connector, standard cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAgency Approvals\u003c\/td\u003e\n\u003ctd\u003eMultiple approvals\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Tip Material\u003c\/td\u003e\n\u003ctd\u003ePolyphenylene sulfide (PPS)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Case Material\u003c\/td\u003e\n\u003ctd\u003eAISI 303 or 304 stainless steel (SST)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eThread\u003c\/td\u003e\n\u003ctd\u003e1\/4-28 UNF\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Thread Engagement\u003c\/td\u003e\n\u003ctd\u003e0.375 in\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Cable\u003c\/td\u003e\n\u003ctd\u003e75 Ω triaxial, fluoroethylene propylene (FEP) insulated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector Material\u003c\/td\u003e\n\u003ctd\u003eGold-plated brass or gold-plated beryllium copper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePower Supply\u003c\/td\u003e\n\u003ctd\u003e-17.5 Vdc to -26 Vdc at 12 mA maximum consumption\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSupply Sensitivity\u003c\/td\u003e\n\u003ctd\u003eLess than 2 mV output change per volt input change\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Resistance\u003c\/td\u003e\n\u003ctd\u003e50 W\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe DC Resistance\u003c\/td\u003e\n\u003ctd\u003e7.45 ± 0.50 Ω for 0.5 m probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecommended Probe Case Torque\u003c\/td\u003e\n\u003ctd\u003e5.1 N·m (45 in·lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Probe Case Torque\u003c\/td\u003e\n\u003ctd\u003e7.3 N·m (65 in·lb)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Connector-to-Connector Torque\u003c\/td\u003e\n\u003ctd\u003e0.565 N·m (0.42 ft·lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMinimum Cable Bend Radius\u003c\/td\u003e\n\u003ctd\u003e25.4 mm (1.0 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTensile Strength\u003c\/td\u003e\n\u003ctd\u003e222 N (50 lbf) probe case to probe lead; 222 N (50 lbf) probe lead to extension cable connectors\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eProbe Temperature Range\u003c\/td\u003e\n\u003ctd\u003e-35°C to +177°C (-31°F to +351°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e0.323 kg\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eInstallation \u0026amp; Setup: Avoiding Common Failures\u003c\/h2\u003e\n\u003cp\u003eThe 1\/4-28 thread on the Bently Nevada 330172-05-63-05-02-05 must be installed with controlled torque. Use a recommended probe case torque of 5.1 N·m (45 in·lb) and never exceed 7.3 N·m (65 in·lb). Over-torquing is a common cause of case distortion and premature failure.\u003c\/p\u003e\n\u003cp\u003eWhen drilling and tapping a mounting hole for a 1\/4-28 probe, use a #3 or larger tap drill. The maximum length of thread engagement is 0.375 in; do not force deeper engagement.\u003c\/p\u003e\n\u003cp\u003eProtect the 75 Ω triaxial cable from sharp bends. The minimum cable bend radius is 25.4 mm (1.0 in), and the connector-to-connector torque should never exceed 0.565 N·m (0.42 ft·lbf). Following these limits keeps the miniature coaxial ClickLoc connection secure without damaging the gold-plated contacts.\u003c\/p\u003e\n\u003ch2\u003eApplications \u0026amp; Integration\u003c\/h2\u003e\n\u003cp\u003eThe Bently Nevada 330172-05-63-05-02-05 works with XL Proximitor Sensors and XL extension cables as part of a complete 3300 proximity transducer chain. The 60 Hz magnetic-field data and DC resistance table confirm this probe is matched for use with those components. For a 5 m system, the probe output in a 60 Hz magnetic field at a 50 mil gap is only 0.0014 mil pp\/gauss, which helps maintain correct readings in electrically noisy environments.\u003c\/p\u003e\n\u003cp\u003eBecause the sensing element is a 5 mm probe, it can be used wherever the 3300 system requires a compact eddy-current sensor to monitor shaft dynamic motion or static position.\u003c\/p\u003e\n\u003ch2\u003eReliability \u0026amp; Maintenance\u003c\/h2\u003e\n\u003cp\u003eThe armored version of the Bently Nevada 330172-05-63-05-02-05 provides added mechanical protection for the probe lead, reducing the risk of abrasion and impact damage.\u003c\/p\u003e\n\u003cp\u003eKeep the probe temperature within the -35°C to +177°C range. Exposing the probe below -34°C may cause premature failure of the pressure seal, so plan winter shutdowns and outdoor storage accordingly.\u003c\/p\u003e\n\u003cp\u003eDuring routine maintenance, check that the cable bend radius stays above 25.4 mm, verify connector torque is below 0.565 N·m, and confirm the probe case has not been over-tightened beyond 7.3 N·m. Any sign of cable kinking or connector damage means the unit should be replaced before the next run.\u003c\/p\u003e\n\u003ch2\u003eSelection and Purchasing Advice\u003c\/h2\u003e\n\u003cp\u003eBefore ordering, confirm that your system needs a 0.5 m total length, a 0.5 in unthreaded length, and a 6.3 in overall case length. The 330172-05-63-05-02-05 uses a miniature coaxial ClickLoc connector with a standard cable and has multiple agency approvals. Matching these options precisely avoids installation delays.\u003c\/p\u003e\n\u003cp\u003eFor a reliable spare or replacement, check the exact part marking on your current probe and compare it with the configuration options listed above. PLC Source PRO can supply this Bently Nevada 330172-05-63-05-02-05 probe and help confirm part-number details before shipment.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44427377049699,"sku":"330172-05-63-05-02-05","price":218.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330172_202_1eaac9b5-8403-4e10-9e4c-d7f5f5a8837d.jpg?v=1785473614","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330172-05-63-05-02-05-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}