{"product_id":"bently-nevada-330171-00-12-05-02-00-industrial-automation-module","title":"Bently Nevada 330171-00-12-05-02-00 Industrial Automation Module","description":"\u003ch2\u003eProduct Introduction\u003c\/h2\u003e\u003cp\u003eWhen vibration monitoring failures cause costly unplanned downtime, the Bently Nevada 330171-00-12-05-02-00 delivers reliable shaft proximity sensing. This 5 mm probe, part of the 3300 series, features a 1\/4-28 UNF thread and is built without armor for standard industrial environments. Manufactured in the U.S.A., the 330171-00-12-05-02-00 is a key component for continuous machine protection and condition monitoring systems.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Requires -17.5 Vdc to -26 Vdc at 12 mA maximum consumption.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSensitivity:\u003c\/strong\u003e Less than 2 mV change in output voltage per volt change in input voltage.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Resistance:\u003c\/strong\u003e 50 Ω.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe DC Resistance (0.5 m length):\u003c\/strong\u003e 7.45 ± 0.50 Ω from center conductor to outer conductor.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Tip Material:\u003c\/strong\u003e Polyphenylene sulfide (PPS).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Case Material:\u003c\/strong\u003e AISI 304 stainless steel (SST).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Cable:\u003c\/strong\u003e 75 Ω triaxial, FEP insulated, available in 0.5, 1, 2, 5, or 9 meters.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProbe Temperature Range:\u003c\/strong\u003e -35°C to +177°C (-31°F to +351°F).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.323 kg.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThread:\u003c\/strong\u003e 1\/4-28 UNF, maximum thread engagement 0.375 in.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTorque (probe case):\u003c\/strong\u003e 5.1 N·m recommended, 7.3 N·m maximum.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eFor the Bently Nevada 330171-00-12-05-02-00, follow precise mounting procedures. When drilling and tapping a mounting hole for a 1\/4-28 probe, use a #3 or larger tap drill. Ensure the maximum length of thread engagement does not exceed 0.375 inches to avoid case damage. Apply recommended torque of 5.1 N·m (45 in·lb) to the probe case; never exceed 7.3 N·m (65 in·lb). The connector-to-connector torque should be 0.565 N·m (0.42 ft·lbf) maximum. Maintain a minimum cable bend radius of 25.4 mm (1.0 in) to prevent cable stress.\u003c\/p\u003e\u003ch2\u003eTroubleshooting \u0026amp; Common Issues\u003c\/h2\u003e\u003cp\u003eCommon problems with proximity probes include incorrect gapping and temperature exposure. The Bently Nevada 330171-00-12-05-02-00 is rated for -35°C to +177°C, but exposing the probe to temperatures below -34°C may cause premature failure of the pressure seal. Also, ensure the supply voltage is between -17.5 and -26 Vdc; operating above -23.5 Vdc can reduce linear range. For reliable performance, maintain a gap of 1.27 mm (50 mils) with an AISI 4140 steel target as specified in the transducer system ratings.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen ordering the Bently Nevada 330171-00-12-05-02-00, verify the unthreaded length (00 = 0 in), overall case length (12 = 12 in), total length (0.5 meter), and connector option (02 = miniature coaxial ClickLoc). The agency approval is not required for this variant. Ensure your system uses a -24 Vdc supply and 10 kΩ load for standard operation. For genuine parts and expert support, trust PLC Source PRO as your reliable supplier.\u003c\/p\u003e\u003cp\u003eFor more details on the Bently Nevada 330171-00-12-05-02-00 or to place an order, contact the PLC Source PRO team today.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44426325885027,"sku":"330171-00-12-05-02-00","price":278.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/330171_202_5ac5b492-fc5c-4dc6-bf10-a3534f144cdb.jpg?v=1785441163","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-330171-00-12-05-02-00-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}