{"product_id":"bently-nevada-190501-10-00-02-industrial-automation-module","title":"Bently Nevada 190501-10-00-02 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eWhen machinery vibration threatens uptime, the \u003cstrong\u003eBently Nevada 190501-10-00-02\u003c\/strong\u003e Velomitor CT Velocity Transducer delivers reliable measurement for industrial automation. This compact, rugged sensor converts velocity into a proportional electrical signal, enabling predictive maintenance and protecting rotating equipment. Designed and manufactured in the U.S.A., the 190501-10-00-02 combines high sensitivity with broad frequency response, making it a dependable choice for continuous vibration monitoring in harsh environments.\u003c\/p\u003e\u003cp\u003eThe 190501-10-00-02 features a 316L stainless steel case, a 2-pin MIL-C-5015 connector, and a stud mounting option with a 3\/8-inch adapter. Its internal electronics are isolated from the case, reducing ground-loop interference. With agency approvals including CSA\/NRTL\/C (Class I, Division 1) and ATEX\/IECEx\/CSA (Class I, Zone 0\/1), this transducer meets stringent safety standards for hazardous areas.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eEvery parameter below is directly from the manufacturer's data for the \u003cstrong\u003eBently Nevada 190501-10-00-02\u003c\/strong\u003e.\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eElectrical Sensitivity\u003c\/td\u003e\n\u003ctd\u003e3.94 mV\/mm\/s (100 mV\/in\/s) ±5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (±1.0 dB)\u003c\/td\u003e\n\u003ctd\u003e3.0 Hz to 900 Hz (180 to 54,000 cpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response (±3.0 dB)\u003c\/td\u003e\n\u003ctd\u003e1.5 Hz to 1.0 kHz (90 to 60,000 cpm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTemperature Sensitivity\u003c\/td\u003e\n\u003ctd\u003e-8% to +5% typical over operating range\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTransverse Response\u003c\/td\u003e\n\u003ctd\u003eLess than 5% of axial sensitivity\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAmplitude Linearity\u003c\/td\u003e\n\u003ctd\u003e±2% to 63.5 mm\/s pk (2.5 in\/s pk)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounted Resonant Frequency\u003c\/td\u003e\n\u003ctd\u003e9 kHz minimum (stud mounted, except quick disconnect)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Bias Voltage\u003c\/td\u003e\n\u003ctd\u003e10.1 Vdc ± 1.0 Vdc, Pin A referenced to Pin B\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic Output Impedance\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;400 Ω typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBroadband Noise\u003c\/td\u003e\n\u003ctd\u003e0.229 mm\/s (0.009 in\/s) pk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Strain Sensitivity\u003c\/td\u003e\n\u003ctd\u003e0.43 mm\/s\/μstrain (0.017 in\/s\/μstrain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eGrounding\u003c\/td\u003e\n\u003ctd\u003eInternal electronics isolated from case\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaximum Cable Length\u003c\/td\u003e\n\u003ctd\u003e305 metres (1,000 ft.) with part number 02173006, no signal degradation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-40°C to +85°C (-40°F to +185°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40°C to +100°C (-40°F to +212°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Limit\u003c\/td\u003e\n\u003ctd\u003e5000 g pk, maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity Limit\u003c\/td\u003e\n\u003ctd\u003e100% condensing, non-submerged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMagnetic Field Susceptibility\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;0.0068 mm\/s\/gauss (0.268 mil\/s\/gauss) @ 50 gauss, 50-60 Hz\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;297 g (10.5 oz.), typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Surface\u003c\/td\u003e\n\u003ctd\u003e33 mm diameter (1.3 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeight\u003c\/td\u003e\n\u003ctd\u003e82 mm (3.2 in)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Material\u003c\/td\u003e\n\u003ctd\u003e316L stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003e2-pin 316L stainless steel MIL-C-5015, top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Torque\u003c\/td\u003e\n\u003ctd\u003e4.5 N-m ± 0.6 N-m (40 in–lbf ± 5 in-lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePolarity\u003c\/td\u003e\n\u003ctd\u003ePin A goes positive with respect to Pin B when velocity is from base to top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Angle\u003c\/td\u003e\n\u003ctd\u003eAny orientation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe \u003cstrong\u003eBently Nevada 190501-10-00-02\u003c\/strong\u003e excels in monitoring rotating machinery such as pumps, motors, fans, and compressors. In a typical predictive maintenance program, this transducer mounts directly on bearing housings to detect early signs of imbalance, misalignment, or bearing wear. Its wide frequency response captures both low-speed and high-speed vibration signatures, allowing maintenance teams to schedule repairs before catastrophic failure.\u003c\/p\u003e\u003cp\u003eFor example, in a chemical plant, the 190501-10-00-02 can be installed on a critical pump. The 3.94 mV\/mm\/s sensitivity provides clear signals even at low vibration levels, while the -40°C to +85°C operating range ensures reliable performance in outdoor or unheated areas. The ATEX\/IECEx approval permits installation in hazardous zones, making it a versatile choice for oil \u0026amp; gas, petrochemical, and power generation facilities.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation is essential for accurate vibration measurement. The \u003cstrong\u003eBently Nevada 190501-10-00-02\u003c\/strong\u003e comes with a plate stud M6x1 to M6x1 mounting hardware and a 3\/8-inch adapter. Follow these steps:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003ePrepare a flat, clean mounting surface on the machine casing. The mounting surface should be at least 33 mm in diameter.\u003c\/li\u003e\n\u003cli\u003eApply the recommended mounting torque of 4.5 N-m ± 0.6 N-m (40 in–lbf ± 5 in-lbf) to ensure a rigid connection.\u003c\/li\u003e\n\u003cli\u003eConnect the MIL-C-5015 connector, ensuring Pin A and Pin B are correctly wired. Pin A goes positive with respect to Pin B when velocity is from base to top.\u003c\/li\u003e\n\u003cli\u003eUse the specified cable (part number 02173006) to maintain signal integrity up to 305 metres (1,000 ft.).\u003c\/li\u003e\n\u003cli\u003eOrient the transducer in any direction, but ensure the mounting surface is perpendicular to the measurement axis for accurate axial readings.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eRoutine inspection of the \u003cstrong\u003eBently Nevada 190501-10-00-02\u003c\/strong\u003e ensures long-term reliability. Because the transducer has no moving parts, maintenance is minimal. However, check the mounting integrity periodically—loose studs can alter frequency response. Inspect the cable and connector for damage, especially in high-vibration or corrosive environments. The 316L stainless steel case resists corrosion, but regular visual checks help prevent unexpected failures.\u003c\/p\u003e\u003cp\u003eWith a shock limit of 5000 g pk and humidity tolerance up to 100% condensing, this transducer is built for demanding industrial settings. By following a simple inspection schedule—quarterly for most applications—you can maximize service life and avoid costly downtime.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eBefore purchasing the \u003cstrong\u003eBently Nevada 190501-10-00-02\u003c\/strong\u003e, verify your system's compatibility. This transducer outputs a velocity signal; ensure your monitor or PLC accepts this input type. Confirm the mounting hardware matches your machine's thread size—the included stud is M6x1 with a 3\/8-inch adapter. Also, verify the cable length requirement; the maximum is 305 metres with the specified cable part number.\u003c\/p\u003e\u003cp\u003eFor reliable sourcing, PLC Source PRO offers genuine Bently Nevada parts with fast worldwide shipping. When ordering, reference the exact model number 190501-10-00-02 to ensure you receive the correct configuration. If you need assistance selecting the right transducer for your application, our technical team is ready to help.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44436231094371,"sku":"190501-10-00-02","price":277.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/190501-00-00-04__E5_89_AF_E6_9C_AC_a127b43c-9427-412a-b97a-d21806a13ec3.jpg?v=1785797155","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-190501-10-00-02-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}