{"product_id":"bently-nevada-190501-07-00-04-industrial-automation-module","title":"Bently Nevada 190501-07-00-04 Industrial Automation Module","description":"\u003ch2\u003eProduct Overview\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 190501-07-00-04 is a Velomitor CT Velocity Transducer engineered for precise vibration measurement in rotating machinery. This industrial automation module delivers reliable velocity data for predictive maintenance and protection systems, helping you avoid unplanned downtime and extend equipment life.\u003c\/p\u003e\u003cp\u003eFeaturing a rugged 316L stainless steel case, the 190501-07-00-04 is built to withstand harsh industrial environments, including high shock and humidity. With a sensitivity of 3.94 mV\/mm\/s (±5%), it provides accurate readings across a broad frequency range, making it suitable for a wide variety of rotating assets.\u003c\/p\u003e\u003ch2\u003eTechnical Specifications\u003c\/h2\u003e\u003cp\u003eThe table below lists the key electrical, environmental, and mechanical parameters of the Bently Nevada 190501-07-00-04:\u003c\/p\u003e\u003ctable\u003e\n\u003cthead\u003e\u003ctr\u003e\n\u003cth\u003eParameter\u003c\/th\u003e\n\u003cth\u003eValue\u003c\/th\u003e\n\u003c\/tr\u003e\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eSensitivity\u003c\/td\u003e\n\u003ctd\u003e3.94 mV\/mm\/s (100 mV\/in\/s) ±5%\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFrequency Response\u003c\/td\u003e\n\u003ctd\u003e3.0 Hz to 900 Hz (180 to 54,000 cpm) ±1.0 dB; 1.5 Hz to 1.0 kHz (90 to 60,000 cpm) ±3.0 dB\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOutput Bias Voltage\u003c\/td\u003e\n\u003ctd\u003e10.1 Vdc ± 1.0 Vdc (Pin A referenced to Pin B)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDynamic Output Impedance\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;400 Ω typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBroadband Noise\u003c\/td\u003e\n\u003ctd\u003e0.229 mm\/s (0.009 in\/s) pk\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBase Strain Sensitivity\u003c\/td\u003e\n\u003ctd\u003e0.43 mm\/s\/μstrain (0.017 in\/s\/μstrain)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOperating Temperature\u003c\/td\u003e\n\u003ctd\u003e-40°C to +85°C (-40°F to +185°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eStorage Temperature\u003c\/td\u003e\n\u003ctd\u003e-40°C to +100°C (-40°F to +212°F)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eShock Limit\u003c\/td\u003e\n\u003ctd\u003e5000 g pk, maximum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity Limit\u003c\/td\u003e\n\u003ctd\u003e100% condensing, non-submerged\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCase Material\u003c\/td\u003e\n\u003ctd\u003e316L stainless steel\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eConnector\u003c\/td\u003e\n\u003ctd\u003e2-pin 316L stainless steel MIL-C5015, top\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMounting Torque\u003c\/td\u003e\n\u003ctd\u003e4.5 N-m ± 0.6 N-m (40 in-lbf ± 5 in-lbf)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e\u0026lt;297 g (10.5 oz.) typical\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\u003cp\u003eThe transducer also features a mounted resonant frequency of 9 kHz minimum (stud mounted) and a magnetic field susceptibility of \u0026lt;0.0068 mm\/s\/gauss @ 50 gauss, 50-60 Hz.\u003c\/p\u003e\u003ch2\u003eKey Features \u0026amp; Benefits\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHigh Accuracy:\u003c\/strong\u003e Sensitivity of 3.94 mV\/mm\/s (±5%) ensures precise velocity measurement.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWide Frequency Range:\u003c\/strong\u003e From 1.5 Hz to 1.0 kHz, covers typical machine vibration frequencies.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIntrinsically Safe:\u003c\/strong\u003e Approved for hazardous areas with Ex ia IIC T4 and Ex nL IIC T4 ratings (Class I, Division 1 and 2).\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRugged Construction:\u003c\/strong\u003e 316L stainless steel case and connector resist corrosion and harsh environments.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Cable Capability:\u003c\/strong\u003e Supports up to 305 meters (1000 ft) of cable without signal degradation.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlexible Mounting:\u003c\/strong\u003e Any orientation; plate stud option for 3\/8-24 threads.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eIndustry Applications\u003c\/h2\u003e\u003cp\u003eThe Bently Nevada 190501-07-00-04 is ideal for vibration monitoring in critical rotating equipment such as turbines, compressors, pumps, and electric motors. In a refinery, for example, this transducer can be installed on a gas compressor to continuously monitor bearing velocity, alerting operators to early signs of imbalance or misalignment. In a power plant, it can be used on steam turbines to ensure smooth operation and prevent costly outages.\u003c\/p\u003e\u003cp\u003eIts intrinsically safe certification makes it suitable for use in hazardous areas where flammable gases or dust may be present, such as chemical processing facilities and oil \u0026amp; gas platforms.\u003c\/p\u003e\u003ch2\u003eInstallation \u0026amp; Setup Guidance\u003c\/h2\u003e\u003cp\u003eProper installation is crucial for accurate vibration measurement. Follow these guidelines for the 190501-07-00-04:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eMount the transducer securely to a flat, clean surface using the provided stud (3\/8-24 thread). Apply the recommended mounting torque of 4.5 N-m ± 0.6 N-m (40 in-lbf ± 5 in-lbf).\u003c\/li\u003e\n\u003cli\u003eEnsure the mounting surface has a 33 mm diameter flat area for proper seating.\u003c\/li\u003e\n\u003cli\u003eConnect the 2-pin MIL-C5015 connector. Observe polarity: Pin A goes positive with respect to Pin B when velocity is from base to top.\u003c\/li\u003e\n\u003cli\u003eUse the specified cable (part number 02173006) for lengths up to 305 meters without signal degradation.\u003c\/li\u003e\n\u003cli\u003eFor hazardous area installations, follow the wiring instructions in drawing 167536.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eMaintenance \u0026amp; Reliability\u003c\/h2\u003e\u003cp\u003eThe 190501-07-00-04 is designed for long-term reliability with minimal maintenance. Its internal electronics are isolated from the case, reducing ground loop issues. The 316L stainless steel construction resists corrosion, and the transducer can operate in 100% condensing humidity. To ensure consistent performance, periodically inspect the mounting stud for tightness and check the cable for damage. While the transducer has no moving parts, environmental factors such as extreme temperatures (-40°C to +85°C) and shock up to 5000 g are within its limits, but regular visual inspection is recommended.\u003c\/p\u003e\u003ch2\u003eSelection Guide \u0026amp; Purchasing Advice\u003c\/h2\u003e\u003cp\u003eWhen purchasing the Bently Nevada 190501-07-00-04, verify the following:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eConfirm the part number exactly: 190501-07-00-04, which includes the plate stud mounting option (07) and MIL-C-5015 connection (00).\u003c\/li\u003e\n\u003cli\u003eCheck agency approval option 04: CSA\/NRTL\/C (Class I, Division 1) and ATEX\/IECEx\/CSA (Class I, Zone 0\/1).\u003c\/li\u003e\n\u003cli\u003eEnsure the transducer's frequency range and sensitivity match your monitoring requirements.\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003ePLC Source PRO offers genuine Bently Nevada parts with reliable sourcing. Contact us for availability and competitive pricing.\u003c\/p\u003e","brand":"Bently Nevada","offers":[{"title":"Default","offer_id":44436218183779,"sku":"190501-07-00-04","price":286.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0678\/8635\/0435\/files\/190501-00-00-04__E5_89_AF_E6_9C_AC_6b3e2732-748d-495d-b0fe-bc292bc4a6f0.jpg?v=1785796728","url":"https:\/\/www.plcsourcepro.com\/products\/bently-nevada-190501-07-00-04-industrial-automation-module","provider":"PLC Source PRO","version":"1.0","type":"link"}